605204

Bertazzoni F60PROXA Manual

11
Zoom out
Zoom in
Previous page
1/48
Next page
11
ENGLISH
Programming the Cooking Stop Time
1 Press M until you hear a beep. Then press M
until the word “End” appears on the clock
display.
2 Select the cooking stop time by pressing
+ or –.
3 You will then hear a beep and the present
time and the word “AUTO” will light up to
show that the oven will switch off
automatically.
4 Select a cooking function and temperature.
5 When it is the time for cooking to stop, the
oven will switch off and an alarm will sound.
6 Press any symbol to turn of the alarm. The
oven will remain off and AUTO will continue
to flash.
7 Keep pressing on M until you hear a beep to
show the function is now off. Then set the
controls to to switch off the oven.
You can use this function even if you are
cooking with the oven. If this is the case,
follow all of the above instructions except No.
4.
You can see the stop cooking time at any time
by following instruction No.1.
Programming Cooking Time and Cooking
Stop Time
11 Press M until you hear a beep. If you press
M again, the word “dur” will appear on the
clock display.
12 Select the cooking time by pressing + or –.
13 A beep will then sound and the present
time and AUTO will show.
14 Press M until you hear a beep. Then press
M until the word “End” appears on the
clock display.
15 Select the stop cooking time by pressing
+ or –.
16 A beep will then sound and the present
time and AUTO will show.
17 Select a cooking function and
temperature.
18 The oven will remain off with AUTO on the
clock display. The oven is now
programmed.
19 When it is the time for cooking to start, the
oven will switch on and cooking will
continue for the selected time. The
symbols AUTO and will light up on the
clock display.
10 When the programmed time is reach, the
oven will switch itself off and an alarm will
sound.
11 Press any symbol to stop the alarm. The
oven will remain off and AUTO will continue
to flash.
12 Press M until you hear a beep in order to
switch off the function. Then set the
controls to to switch off the oven.
You can see the state of the timer at any time
by following instructions 1 and 4.
If you wish to modify the timer setting, you
must cancel the function by pressing + and - at
the same time. Re-programme the oven by
following the instructions given.
Caution
In the event of power failure, your electronic
clock timer settings will be erased and 00:00
will flash on the display. Reset the clock and
programme again.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bertazzoni F60PROXA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bertazzoni F60PROXA in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 4,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info