605204
10
Zoom out
Zoom in
Previous page
1/48
Next page
10
Setting the Electronic Clock
When you switch on the oven, you will notice
that the word AUTO will flash on the display
with 00:00. Press the + and symbols until
you hear a beep and see a dot flashing
between the digits of the clock. Then set the
clock time by pressing on the + or symbols.
You will hear a beep to confirm that the time
has been set. The symbol will remain lit.
Should you wish to change the time, follow
these instructions again.
Manual Operation
After setting the clock, the oven is ready for
use. Select a cooking temperature and
function by pressing and turning the oven
controls.
To turn off the oven, set the controls to .
Electronic Clock Functions
Timer Alarm: An audible signal is produced at
the programmed time, even if the oven is not
being used.
Cooking Time: This function allows you to
programme cooking time length, after which
the oven will turn off automatically.
Cooking Stop Time: This function allows you to
programme the time for cooking to stop,
after which the oven will turn off automatically.
Cooking Time and Cooking Stop Time: This
function allows both cooking time length and
the stop time to be programmed. The oven
switches on automatically at the set time and
operates for the cooking time it has been
programmed for. It switches itself off
automatically at the entered stop time.
Changing the Clock Alarm Tone
1 Press + and - at the same time. You will
notice a dot light up between the + and
symbols on the clock display.
2 Press M and you will see “ton1” light up on
the clock display.
3 The alarm tone can be changed by
repeatedly pressing on the symbol.
Programming the Timer Alarm
1 Press on M. The symbol will flash on the
clock display.
2 Select the length of time after which you
want the alarm to sound by pressing on
+ or .
3 The alarm will be confirmed by two
consecutive beeps and the display will show
the current time. The symbol will remain lit.
4 At the programmed time, the alarm will
sound and the symbol will begin to flash.
5 Press on any symbol to turn off the alarm.
The symbol will continue to flash.
6 Keep pressing M until the function is
switched off.
You can see how much time is left at any time
by pressing M until the symbol flashes. You
can then change the selected time by
pressing + or . The beep you hear will
confirm the new time has been set.
Programming Cooking Time
1 Press M until you hear a beep. Press M
again and the word dur” will appear on the
clock display.
2 Select the cooking time by pressing + or .
3 You will then hear a beep and the present
time and the word “AUTO” will light up to
show that the oven will switch off
automatically.
4 Select a cooking function and temperature.
5 When the set cooking time is over, the oven
will turn off and an alarm will sound.
6 Press any symbol to turn off the alarm. The
oven will remain off and AUTO will continue
to flash.
7 Keep pressing on M until you hear a beep to
show the function is now off. Then set the
controls to to switch off the oven.
You can see how much time is left and change
the remaining cooking time. Follow the
previous instructions.
To cancel this function, just press + and at
the same time.
Oven Use
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bertazzoni F60PROXA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bertazzoni F60PROXA in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 4,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info