Manual Bernina Bernette 12 (page 124 of 136) (English, German, Dutch, French)

453315

124

Zoom out

Zoom in

1/136

120

10 12 15

Caution:

Main switch on "O". Disconnect machine

from electricity supply before inserting or

removing any parts and before cleaning.

Cleaning

Remove the stitch plate:

Raise the needle to its highest position.

Remove the extension table and open the

hinged front cover on the front of the free

arm. Loosen the two screws, then remove

the stitch plate. (1)

Cleaning and lubricating the hook:

Take out the bobbin case by opening its

latch and pulling it out from the shuttle race

(3). Snap the two hook retaining arms (a)

outwards. Remove the hook race cover (b)

and the hook (c).Clean rst the feed dogs

with the brush (2). Then clean with a soft

cloth hook (c), hook race (d) and hook race

cover (b). Lubricate at the point (d) (1 to 2

drops) with sewing machine oil. Turn the

handwheel until the driver (e) is in the left

position. Replace the hook (c) then the hook

race cover (b), snap back the two retaining

arms (a). Insert bobbin and bobbin case and

replace the stitch plate.

Note:

When the needle is lowered, the shuttle

hook cannot be removed.

Important:

Fabric, uff and threads must be removed

regularly. Your machine should be serviced

at regular intervals at your local dealer.

Maintenance

502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Bernette 12 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 14,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bernina Bernette 12 Manual

Product: