Manual Bernina Bernette 12 (page 122 of 136) (English, German, Dutch, French)

453315

122

Zoom out

Zoom in

1/136

118

10 12 15

Presser foot available as optional accessory.

Always try to sew rst without the walking

foot accessory which should be used only

when necessary.

The "Walking foot" accessory equalizes the

feeding of the upper and lower layers of fabric

and improves the matching of plaids, stripes

and patterns. This foot helps to prevent uneven

feeding of very difcult fabrics.

1. Lift the presser foot bar.

2. Remove the "presser foot holder". (see page

26)

3. Attach the "walking foot" to the machine in

the following way.

i) The fork arm should t into the needle

screw and clamp. (2)

ii) Slide the plastic "attaching head" from

your left to right so that it is tted on

the "presser foot bar".

iii) Lower the "presser foot bar".

iv) Tighten the xation screw

4. Make sure both the "needle screw" and the

"xation screw" are tight.

5. Draw the bobbin thread up. Lay both

threads to the back under the foot.

a Fork arm

b Attaching head

c Needle bar

d Needle screw & clamp

e Presser bar attaching screw

f Presser foot bar

Walking foot

502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Bernette 12 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 14,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bernina Bernette 12 Manual

Product: