508640
77
Zoom out
Zoom in
Previous page
1/92
Next page
5.6. Adjusting Thread Tension - Cover
5.6. Regulación fina de las tensiones de los hilos - cobertura
5.6. Feineinstellung Fadenspannungen - Cover
5.6. Réglage fin de la tension du fil - point enveloppant
Tension adjustments Cover
stitch
The right needle thread forms loops on
the underside:
Tighten the right needle (upper looper)
tension (blue, C)
The center needle thread forms loops
on the underside:
Tighten the right needle tension (green,
B).
The left needle thread forms loops on
the underside:
Tighten the left needle tension (yellow,
A).
The looper thread is loose on the
underside:
Tighten the looper tension (inside cloth
plate , D) (purple).
Punto de cobertura
El hilo de la aguja derecha forma lazos
en la parte de abajo:
Aumentar la tensión del hilo de la
aguja derecha (azul, C).
El hilo de la aguja del centro forma
lazos en la parte de abajo:
Aumentar la tensión del hilo de la
aguja del centro (verde, B).
El hilo de la aguja izquierda forma
lazos en la parte de abajo:
Aumentar la tensión del hilo de la
aguja izquierda (amarillo, A).
El hilo de la lanzadera está flojo en la
parte de abajo:
Aumentar la tensión del hilo de la
lanzadera. (D)
Fadenspannung anpassen
Cover-Stich
Der rechte Nadelfaden bildet lose
Schlaufen auf der Unterseite:
Die rechte Nadelfadenspannung er
-
höhen (blau, C).
Der Nadelfaden mitte bildet lose
Schlaufen auf der Unterseite:
Nadelfadenspannung mitte erhöhen
(grün, B).
Der linke Nadelfaden bildet lose
Schlaufen auf der Unterseite:
Die linke Nadelfadenspannung er
-
höhen (gelb, A).
Der Greiferfaden ist lose auf der Unter
-
seite:
Greiferfadenspannung erhöhen. (D)
Adapter la tension de fil point
enveloppant
Le fil de laiguille de droite constitue
des boucles ches sur la face inféri
-
eure:
Augmenter la tension du fil de l’aiguille
de droite (bleu, C).
Le fil de l’aiguille du milieu constitue
des boucles ches sur la face inféri
-
eure:
Augmenter la tension du fil de l’aiguille
du milieu (vert, B).
Le fil de l’aiguille de gauche constitue
des boucles ches sur la face inféri
-
eure:
Augmenter la tension du fil de l’aiguille
de gauche (jaune, A).
Le fil de boucleur est lâche sur la face
inférieure:
Resserrer la tension du fil de boucleur
(dans le plateau de travail, D).
A CB
D
76
5
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 1300MDC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 1300MDC in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 24,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 1300MDC

Bernina 1300MDC User Manual - German, Dutch, French, Italian - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info