Manual Berner GA101 (page 8 of 68) (English, German, Dutch, French)

474160

Zoom out

Zoom in

1/68

Note

The installer must check that the fitting materials supplied are

suitable for the purpose and intended place of installation.

The clearance between the highest point of the door and

the ceiling (also when the door is opening) must be at

least 30 mm (see figure 1.1a/1.1b ). If there is inadequate

clearance, the operator may also be installed behind the

opened door, provided sufficient space is available. In

these instances, an extended door link (to be ordered

separately) must be used. The garage door operator can

be positioned off-centre by a maximum of 50 cm. The

exception being sectional doors with high-lift tracks

(track application "H"), where a special track fitting is re-

quired. The required shockproof electric socket allowing

the operator to be connected to the electricity supply

should be installed at a distance of approx. 50 cm from

the operator head. Please check these dimensions!

Note

A sign warning about the trap hazard must be permanently

affixed at a conspicuous location or in the proximity of the

permanently installed push-buttons used to operate the

door.

1.3 Warnings

Permanently installed controls (such as

push-buttons, switches etc.) have to be

installed within sight of the door but well

away from any moving parts at a height

of at least 1.5 m. It is vital that they are

installed out of the reach of children!

Make sure that

- neither persons nor objects are located

within the door's range of travel.

- children do not play around with the

door system!

- the rope of the mechanical release on

the carriage cannot become entangled

in the ceiling's support system or in any

other protruding parts of vehicles or the

door.

ATTENTION

For garages without a second access door, an

emergency release must be fitted to ensure

that there is no danger of getting locked out.

This must be ordered separately and its function

checked once a month.

ATTENTION

Do not allow anyone to hang bodily from the

release pull rope with knob!

1.4 Maintenance advice

The garage door operator is maintenance-free. For your

own safety, however, we recommend having the door

system checked by a specialist in accordance with the

manufacturer's specifications. Inspection and maintenance

work may only be carried out by a specialist. In this con-

nection, please contact your supplier. A visual inspection

may be carried out by the owner.

If repairs become necessary, please contact your supplier.

We would like to point out that any repairs not carried

out properly or with due professionalism shall render the

warranty null and void.

1.5 Information on the illustrated section

The illustrated section shows installation of the operator

on an up-and-over door. Where installation differs for a

sectional door, this is shown in addition. In this instance,

letters are assigned to the figures as follows:

a to the sectional door and

to the up-and-over door.

Some of the figures additionally include the symbol

shown below, offering a text reference. These references

to specific texts in the ensuing text section provide you

with important information regarding installation and

operation of the garage door operator.

Example:

= see text section, point 2.2

In addition, in both the text section and the illustrated

section at the points where the DIL-switches of the

operator are explained, the following symbol appears

to indicate a factory setting or settings.

= This symbol indicates the

factory setting/s of the

DIL-switches.

No part of this instruction manual may be reproduced without

our prior permission. Subject to changes.

2.2

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Berner GA101 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Berner GA101 Manual

Product: