TABLE OF CONTENTS PAGE
A Supplied Items 2
B Required Tools for Installation 2
1 IMPORTANT NOTES 7
1.1 Important safety instructions 7
1.1.1 Warranty 7
1.1.2 Checking the door / door system 7
1.2 Important instructions for safe installation 7
1.2.1 Before installing the garage door operator 7
1.3 Warnings 8
1.4 Maintenance advice 8
1.5 Information on the illustrated section 8
Illustrated Section 15-29
2 DEFINITIONS 39
3 PREPARING FOR INSTALLATION 39
3.1 Required clearance for installing the operator 39
3.1.1 Before installing the boom 39
3.1.2 Boom operating modes 39
3.1.3 Manual operation 39
3.1.4 Automatic operation 40
3.2 Installing the garage door operator 40
3.2.1 Centrally positioned lock on a sectional door 40
3.2.2 Off-centred reinforcement profile on a sectional door 40
3.2.3 Tensioning the toothed belt 40
3.2.4 Establishing the door's end-of-travel positions
by installing the limit stops 40
3.3 Electrical connection 40
3.3.1 Connecting additional components 41
3.3.2 Connecting external IMPULSE buttons
to start or stop travel cycles 41
3.3.3 Connecting an additional external radio receiver 41
3.3.4 Connecting a 2-wire photocell 41
3.3.5 Connecting a wicket door contact 41
3.3.6 Connecting the options relay PR 1 41
3.3.7 Emergency accumulator 41
4 PUTTING THE OPERATOR INTO SERVICE 41
4.1 Preparation 41
4.2 Deleting the door data 41
4.3 Learning cycles 41
4.4 Setting the forces 42
4.5 Radio receiver 42
4.5.1 Integral radio module 42
4.5.2 Connecting an external radio receiver 42
4.5.3 Deleting the data of the internal radio module 42
4.6 Setting the DIL-switches 42
4.6.1 Automatic timer 42
4.6.2 CLOSE end-of-travel signalling
DIL-switch
A
➜ OFF / DIL-switch B ➜ ON 43
4.6.3 Advance warning phase
DIL-switch A
➜ ON / DIL-switch B ➜ OFF 43
4.6.4 External lighting
DIL-switch A
➜ OFF / DIL-switch B ➜ OFF 43
4.6.5 Door type
DIL-switch C 43
4.6.6 Photocell
DIL-switch D 43
4.6.7 Stop / static current circuit with self-monitoring
DIL-switch E 43
4.6.8 Door maintenance indication
DIL-switch F 43
