Manual Berner C500 (page 36 of 144) (English, German, Dutch, French, Italian, Spanish)

680440

Zoom out

Zoom in

1/144

5.11 DIL switch14

Impulse behaviour during the hold-open phase:

The impulse behaviour during the hold-open phase can be set

for operation with automatic timed closing.

14 ON An impulse cancels the hold-open phase.

Theoperator closes the gate after the

pre-warning phase has elapsed.

14 OFF

An impulse increases the hold-open phase by the

pre-set time.

5.12 DIL switch15

Setting the speed:

▶

See Figure9.2 and section4.3.2

15 ON Slow mode (slow speed); (no SKS required)

15 OFF

Normal mode (normal speed)

5.13 DIL switch16

Setting the operating mode:

Press-and-hold operation can be set with DIL switch16.

Theforce limit is set to the maximum value.

16 ON Press-and-hold operation

• A permanent contact at terminals20+ 21

moves the operator in the OPEN direction

• A permanent contact at terminals20+ 23

moves the operator in the CLOSE direction

• The operator stops if the respective contact

is interrupted

16 OFF

Normal mode

NOTE:

Special functions are possible during press-and-hold

operation in conjunction with a universal adapter print UAP1.

6 Radio

CAUTION

Danger of injuries due to unintended gate travel

Unwanted gate travel may occur while teaching in the radio

system.

▶

Pay attention that no persons or objects are in the

gate's travel range when teaching in the radio system.

• After teaching-in or extending the radio system, perform

a function check.

• Only use original components when extending the radio

system.

• Local conditions may affect the range of the radio

system. Moreover, when used at the same time,

GSM900 mobile phones can affect the range.

6.1 Hand transmitter BDS140

WARNING

Danger of injury due to unwanted

gate travel

Pressing a button on the hand

transmitter may result in unwanted gate

cycles and cause injury.

▶

Make sure that the hand

transmitters are kept away from

children and can only be used by

people who have been instructed

on how the remote-control gate

functions!

▶

If the gate has only one safety

feature, only operate the hand

transmitter if you are within sight of

the gate!

▶

Only drive or pass through remote-

control gate systems when the gate

is at a standstill!

▶

Please note that unwanted gate

cycles may occur if a hand

transmitter button is accidentally

pressed (e.g. if stored in a

pocket / handbag).

ATTENTION

Functional disturbances caused by environmental

conditions

These conditions can impair function!

Protect the hand transmitter from the following conditions:

• Direct sunlight (perm. ambient temperature:

– 20°C to + 60°C)

• Moisture

• Dust

6.1.1 Description of the hand transmitter BDS140

▶

See Figure10

1 LED

2 Hand transmitter buttons

3 Battery compartment cover

4 Battery

6.1.2 Inserting / changing the battery

▶

See Figure10

▶

Use only the battery type AAA (LR03) 1,5 V.

6.1.3 Excerpt from the declaration of conformity

Conformity of the abovementioned product with the

requirements of the directives according to article3 of the

R&TTE directives 1999 / 5 / EC was veriﬁed by compliance

with the following standards:

• EN 300 220-1

• EN 300 220-3

• EN 301 489-1

• EN 300 489-3

The original declaration of conformity can be requested from

the manufacturer.

C300 - C800 / Rev. 1.1 RE / 07.2014

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Berner C500 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 12,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Berner C500 Manual

Product: