673662
14
Zoom out
Zoom in
Previous page
1/18
Next page
6. USING THE SLICING MACHINE
6.1 LOADING THE GOODS
-
Using the flywheel (1) bring the carriage (2) all
forward (towards the operator);
-
Pull back the sliding overplate (3) completely (away from
the blade) using the handwheel (4) or the rapid advance
lever (5);
-
Place the food to be sliced on the overplate and block
it with the food press (6) regulating the height as well;
- Regulate the thi
ckness of the slice by pulling and
rotating the knob (7) at the same time, graduated from
0 to 8;
-
Bring the overplate with the goods towards the blade
by using the rapid advance lever or the handwheel;
6.2 CUTTING THE GOODS
-
Turn the flywheel clockwise (do not turn it counter
clockwise, this could seriously damage the machine);
-
During the forward movement of the carriage (away
from the operator) the goods will go into the blade and
the slice, guided by the slice deflector
, will fall onto the
plate below;
-
During the return movement of the carriage (towards
the operator) the mechanical device which makes the
overplate advance transversally towards the blade will
be put into motion, its value pre-
determined with the
slice thickness regulating knob.
P15 Series
Using the flywheel (1) bring the carriage (2) all
Pull back the sliding overplate (3) completely (away from
the blade) using the handwheel (4) or the rapid advance
Place the food to be sliced on the overplate and block
it with the food press (6) regulating the height as well;
ckness of the slice by pulling and
rotating the knob (7) at the same time, graduated from
Bring the overplate with the goods towards the blade
by using the rapid advance lever or the handwheel;
Turn the flywheel clockwise (do not turn it counter
clockwise, this could seriously damage the machine);
During the forward movement of the carriage (away
from the operator) the goods will go into the blade and
, will fall onto the
During the return movement of the carriage (towards
the operator) the mechanical device which makes the
overplate advance transversally towards the blade will
determined with the
14
12-12
-
1
2
3
User Manual
-
07 UM – CodeF2 - Rev. 0.1
4
5
6
7
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berkel P15 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berkel P15 Series in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info