673662
16
Zoom out
Zoom in
Previous page
1/18
Next page
7. MAINTENANCE AND REPAIRS
7.1 GENERAL INFORMATION
The operator is allowed to carry out the
following maintenance:
- Blade sharpening
, periodically; the interval and
length
of the sharpening obviously depend on the use
of the machine (work times and type of product used).
-
Lubrication of the carriage guide bars
and overplate:weekly;
-
Adjustment of the blade drive chain
necessary, see the relative paragraph.
- Adjustment of the bevel gear pair
: as necessary,
see the relative paragraph.
Maintenance to be carried out exclusively by personnel
authorised by the manufacturer is as follows:
- Replacing the blade;
- Replacing the sharpener
grindstones; - Replacing the chain;
-
Repairing the structural parts, repairing
and/or replacing compon
ents under the base.
7.2 SHARPENING THE BLADE
Proceed as follows as soon as it is noticed that there is
less cutting capacity:
WARNING: Danger of cutting!
Use protective gloves which are resistant to cutting
and tearing and concentrate on the job at hand.
PAY CAREFUL ATTENTION!
-
Loose the knob of handle grip of the sharpener.
-
Lift the sharpener and to rotate him/it of 180°.
-
Low with attention the sharpener, the blade
will center automatically among the two grindstones.
- Block the knob.
-
Rotate the volano and to press contemporarily,
for about 10-15 seconds, the buttons.
-
Interrupt the rotation and to check on the blade if a light
drivel is formed.
-
Than put in rotation the badminton and press
contemporarily the button for 2-3 seconds.
- Put the sharpener in the native position. .
Note: do not insist more than 2-
3 seconds with the
burring operation so as to avoid damage to the edge
of the blade.
P15 Series
, periodically; the interval and
of the sharpening obviously depend on the use
of the machine (work times and type of product used).
Lubrication of the carriage guide bars
Adjustment of the blade drive chain
: as
: as necessary,
Maintenance to be carried out exclusively by personnel
Repairing the structural parts, repairing
ents under the base.
1
Proceed as follows as soon as it is noticed that there is
Use protective gloves which are resistant to cutting
and tearing and concentrate on the job at hand.
Loose the knob of handle grip of the sharpener.
3
Lift the sharpener and to rotate him/it of 180°.
Low with attention the sharpener, the blade
will center automatically among the two grindstones.
Rotate the volano and to press contemporarily,
Interrupt the rotation and to check on the blade if a light
4
Than put in rotation the badminton and press
3 seconds with the
burring operation so as to avoid damage to the edge
16
12-12
-
User Manual
2
5
-
07 UM – CodeF2 - Rev. 0.1
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berkel P15 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berkel P15 Series in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info