673662
13
Zoom out
Zoom in
Previous page
1/18
Next page
5. INSTALLATION
5.1 INSTALLATION OF THE MACHINE
If a support column (optional) is not used, install the
machine on a surface which is level, dry and suitable for
the weight of the machine plus the food to be sliced;
refer to paragraph 3.1.
Check that there is nothing that can get in the way of
the flyw
heel, carriage movement and food loading.
5.2 COMMAND DESCRIPTION
5.2.1 MANOEUVRING FLYWHEEL
The flywheel (1) turned clockwise allows the carriage
to be moved with the food plate with simultaneous
blade rotation.
5.2.2 REGULATING KNOB FOR SLICE THICKNESS
The thickness of the slice is regulated by turning
the graduated scale knob (2) clockwise.
Regulating field: see paragraph 3.2.
5.2.3 OVERPLATE ADVANCE HANDWHEEL
The handwheel (3) allows the overplate with the
p
roduct to be brought quickly near to the blade after
loading it or taken away from the blade after cutting or
for small regulations.
5.2.4 OVERPLATE RAPID ADVANCE LEVER
By moving it downwards and keeping it there, the lever
(4), allows rapid movement of
the overplate, towards the
blade or away from it after cutting.This operation is
much quicker than with the handwheel (3).
P15 Series
5.1 INSTALLATION OF THE MACHINE
If a support column (optional) is not used, install the
machine on a surface which is level, dry and suitable for
the weight of the machine plus the food to be sliced;
Check that there is nothing that can get in the way of
heel, carriage movement and food loading.
The flywheel (1) turned clockwise allows the carriage
to be moved with the food plate with simultaneous
5.2.2 REGULATING KNOB FOR SLICE THICKNESS
The thickness of the slice is regulated by turning
5.2.3 OVERPLATE ADVANCE HANDWHEEL
The handwheel (3) allows the overplate with the
roduct to be brought quickly near to the blade after
loading it or taken away from the blade after cutting or
5.2.4 OVERPLATE RAPID ADVANCE LEVER
By moving it downwards and keeping it there, the lever
the overplate, towards the
blade or away from it after cutting.This operation is
4
1
13
12-12
-
1
User Manual
2
-
07 UM – CodeF2 - Rev. 0.1
3
2
4
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berkel P15 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berkel P15 Series in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info