577368
30
Zoom out
Zoom in
Previous page
1/58
Next page
08/ 2012 30 / 58
BENNING ST 750 A
Besides the measuring result (measured
value), the overall result is displayed (e.g.
"Pass"byagreeneldand"Fail"bya
redeld).Accessibleconductiveparts
which are not connected with the protec-
tive conductor must be scanned by means
of the probe / probe tip (VDE 0751-1).
The protective conductor current is displayed
and the probe current is added! For measure-
ments by means of the current clamp, the
measured values have to be entered manually!
10.10 PLeak – Patient Leakage Current
The patient leakage current measurement corresponds to the measurement between all patient
connectionsofappliedpartsoftype"F"(medicalelectricaldevices)andprotectiveearthandacces-
sible conductive parts which are not connected to earth (protection classes I and II). The patient
leakage current can be measured by means of the leakage current measurement method, the direct
measurement method Dir or the alternative leakage current measurement method Alt..
Testing by means of the probe (probe tip) according to VDE 0751-1. In the start menu, select the
correspondingVDEregulationandthentheprotectionclass.Inthe"Testacc.toVDE....(Class.)"
menu, selection menu, press the <PLeak>button.Selectthedevicecategory("BF"or"CF")and
thedesiredmeasurementmethod("Dir"or"Alt.").Startmeasurementbypressing<Start>.
The limiting values according to VDE 0751 are taken into consideration.
Press <L-N> to measure with reversed polarity.
Finish or stop the measurement by pressing <Stop>, press <Pause>/ <Next> for a measuring
pause and press <Reset> to delete the measured value. Besides the measuring result (measured
value),theoverallresultisdisplayed(e.g."Pass"byagreeneldand"Fail"byaredeld).
Measuring circuit for leakage current measurement (direct measurement) of applied parts between
allpatientconnectionsofappliedpartsoftype"F"(medicalelectricaldevices)andprotectiveearth
and accessible conductive parts which are not connected to earth (protection classes I and II): Test-
ing by means of the probe (probe tip) according to VDE 0751-1. Accessible conductive parts which
arenotconnectedtoearthhavetobeconnectedtothe"PE"jackbymeansofasecondtestcable
(4)! Only the probe current is displayed!
10.11 Funct. - Functional Test
Only after a passed test, the test sample may be tested for correct functioning! The fault current
measurement is carried out as differential current measurement! In the start menu, select the corre-
spondingVDEregulationandthentheprotectionclass.Inthe"Testacc.toVDE....(Class.)"menu,
selection menu, press the <Funct.> button. Start measurement by pressing <Start>.
The limiting values according to VDE 0701-0702 or to VDE 0751-1 are taken into considera tion.
Press <L-N> to measure with reversed polarity. Finish or stop the measurement by pressing <Stop>,
press <Pause>/ <Next> for a measuring pause and press <Reset> to delete the measured value.
Besidesthemeasuringresult (measured value), the overall result is displayed (e.g."Pass"bya
greeneldand"Fail"byaredeld).
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning ST 750A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning ST 750A in the language / languages: English as an attachment in your email.

The manual is 7,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Benning ST 750A

Benning ST 750A User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info