577368
32
Zoom out
Zoom in
Previous page
1/58
Next page
08/ 2012 32 / 58
BENNING ST 750 A
Besides the measuring result
(measured value), the overall result
isdisplayed(e.g."Pass"byagreen
eldand"Fail"byaredeld).
BENNING ST 750 A
38 / 68
V
L N
1
5
2
4
Sonde
3
PE-Buchse
PE
PE
L N
ST 750A
Schutzkleinspannung nach DIN VDE 0701-0702
ST750A Gerätetester
1 Voltmeter (V)
2 Buchse, „Sonde“
3 Buchse, „ PE-Buchse“
4 Prüfling
5 Prüfsteckdose
Messkreis für die Messung der Übereinstimmung mit den Vorgaben der
Bemessungsspannung (25V gegen Erde) von Geräten mit SELV/ PELV
Spannungen.
10.14. Messwerte ansehen, speichern, drucken
Beispiel, VDE 0701-0702 (SK I)
Bereits nach der ersten manuellen Messung/Prüfung (auch Anschlusstest)
von einem Prüfling kann der Messwert angesehen, gespeichert oder
ausgedruckt werden Hierzu die Taste <Messwerte> im Menü “Prüfung
nach VDE .... (SK .)“ betätigen. Im öffnenden Menü „Testergebnis“ die Tast
<Messwerte> drücken. Die Messergebnisse der bereits durchgeführten
Messungen (Liste wird mit Anzahl der Messergebnisse ergänzt) werden
angezeigt. Falls gespeichert oder gedruckt werden soll, bitte auch die
Prüfungsart mit eintragen (siehe Menü)!
Speichern, durch Betätigen der Taste <Speichern> können die Mess-
ergebnisse für einen bestimmten Prüfling gespeichert werden. Es muss
jedoch der Prüfling in der „Prüflingsauswahl vorhanden sein oder neu
aufgenommen werden. Siehe Kapitel 11, Datenbank.
Drucken, über einen bluetoothfähigen Drucker kann das Messergebnis
sofort ausgedruckt werden. Einstellung siehe Kapitel 18., „Bluetooth
Drucker“
Achtung, die nicht gespeicherten Messergebnisse sind nur solange
abrufbar wie das Menü “Prüfung nach VDE .... (SK .)“ nicht verlassen wird!
Safety extra-low voltage according to DIN VDE
0701-0702
BENNING ST 750 A Appliance Tester
1 voltmeter (V)
2 "Probe"jack
3 "PE"jack
4 test sample
5 test socket
Measuringcircuitformeasuringthecompliancewithspecicationsregardingtheratedvoltage(25V
to earth) of devices with SELV / PELV voltages.
10.14 Viewing, Saving and Printing Measured Values
Example, VDE 0701-0702 (protection class I)
Alreadyaftertherstmanualmeasurement/test(alsoconnectiontest)ofatestsample,itispos-
sible to view, save or print the measured value. For this purpose, press the <Measured Values>
buttoninthe"Testacc.toVDE....(Class.)"menu.Intheopening"TestResult"menu,pressthe
<Meas. Value> button. The measured values of the measurements that have already been carried
out will be displayed (number of measuring results will be listed additionally). If you want to save or
print the data, please make sure to enter the test type as well (see menu)!
Saving: Press the <Save>buttontosavethemeasuringresultsforaspecictestsample.However,
thetestsamplemustalreadyexistorbenewlycreatedinthe"Testsampleselection"(seechapter
14"Database").
Printing: The measuring result can be printed immediately by means of a printer supporting Blue-
tooth(forsettingsseechapter18"BluetoothPrinter").
Attention! Unsaved measuring results are only available as long as you do not exit the
"Testacc.toVDE....(Class.)"menu!
probe
jack PE
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning ST 750A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning ST 750A in the language / languages: English as an attachment in your email.

The manual is 7,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Benning ST 750A

Benning ST 750A User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info