577344

Benning MM P3 Manual

27
Zoom out
Zoom in
Previous page
1/202
Next page
03/ 2014
BENNING MM P3
19
8.2 Voltage measurement
Do not exceed the maximum permitted voltage with respect to earth
potential! Electrical danger!
The highest voltage which may be applied to the
- COM safety measuring lead (black)
J
- safety measuring lead (red) for V, Ω, , Hz
9
of the BENNING MM P3 against ground is 600 V.
- Select the desired function (V AC) or (V DC) by means of the rotary switch
7
of
the BENNING MM P3.
- Bring the safety measuring leads into contact with the measuring
points and read the measured value on the digital display
of the
BENNING MM P3.
- Use the „SELECT“ key
5
in switch setting (V
AC
) to switch over to frequency
measurement (press the key once) or to pulse-duty factor measurement (press
the key twice).
Note:
In lower voltage ranges, the „zero volt“ indication might fail to appear due to interfer-
ence, if the safety measuring leads are open. Check the BENNING MM P3 for correct
functioning by short-circuiting the measuring probes.
See gure 2: DC voltage measurement
See gure 3: AC voltage measurement
8.3 Resistance measurement
- Select the desired function (Ω, , ) by means of the rotary switch
7
of the
BENNING MM P3
- Bring the safety measuring leads into contact with the measuring
points and read the measured value on the digital display
of the
BENNING MM P3.
See gure 4: Resistance measurement
8.4 Diode test
- Select the desired function (Ω, , ) by means of the rotary switch
7
of the
BENNING MM P3.
- Switch over to the diode test ( ) by means of the „SELECT“ key
5
of the
BENNING MM P3 (press the key once).
- Bring the safety measuring leads into contact with the diode connections and
read the measured value on the digital display
of the BENNING MM P3.
- For a standard Si diode applied in conduction direction, a conduction voltage
between 0.400 V and 0.900 V is displayed. „000“ indicates a short-circuit inside
the diode, „OL“ indicates an interruption inside the diode.
- For a diode applied in reverse direction, „OL“ is indicated. If the diode is defective,
„000“ or other values are indicated.
See gure 5: Diode test
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning MM P3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning MM P3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info