577344
24
Zoom out
Zoom in
Previous page
1/202
Next page
03/ 2014
BENNING MM P3
16
6. Ambient conditions
- The BENNING MM P3 is intended for measurements under dry ambient condi-
tions,
- Maximum barometric height for measurements: 2000 m,
- Overvoltage category / installation category: IEC 60664-1/ IEC 61010-1 → 300 V
category III; 600 V category II,
- Contamination class: 2,
- Protection category: IP 30 DIN VDE 0470-1 IEC/EN 60529
IP 30 means: Protection against access to dangerous parts and protection
against solid impurities of a diameter > 2.5 mm, (3 – rst index).
No protection against water, (0 – second index).
- Operating temperature and relative air humidity:
For operating temperatures from 0 °C to 30 °C: relative air humidity less than 80 %,
For operating temperatures from 31 °C to 40 °C: relative air humidity less than 75 %,
For operating temperatures from 41 °C to 50 °C: relative air humidity less than 45 %,
- Storage temperature: The BENNING MM P3 can be stored at temperatures be-
tween - 20 °C and + 60 °C (air humidity of 0 to 80 %). During storage, the bat-
teries should be removed.
7. Electricalspecications
Note: The measuring accuracy is specied as the sum of:
- a relative part of the measured value and
- a number of digits (i.e. counting steps of the last digit).
This measuring accuracy applies for temperatures from 18 °C to 28 °C and a relative
air humidity less than 80 %.
7.1 DC voltage ranges (Switch setting: V
DC
mV
DC
)
The input resistance is 10 MΩ.
Measuring range Resolution Measuring accuracy
Overload
protection
400 mV 0.1 mV ± (0.7 % of the measured value + 5 digits)
600 V
DC
4 V 1 mV ± (0.6 % of the measured value + 2 digits)
600 V
DC
40 V 10 mV ± (0.6 % of the measured value + 2 digits)
600 V
DC
400 V 100 mV ± (0.6 % of the measured value + 2 digits)
600 V
DC
600 V 1 V ± (0.7 % of the measured value + 5 digits)
600 V
DC
7.2 AC voltage ranges (Switch setting: V
AC
, Hz, %)
The input resistance is 10 MΩ in parallel 100 pF.
Measuring range Resolution
Measuring accuracy *
1
within the
frequency range 50 Hz - 500 Hz
Overload
protection
400 mV 0.1 mV ± (1.5 % of the measured value + 5 digits) 600 V
eff
4 V 1 mV ± (0.9 % of the measured value + 5 digits) 600 V
eff
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning MM P3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning MM P3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info