577344
23
Zoom out
Zoom in
Previous page
1/202
Next page
03/ 2014
BENNING MM P3
15
Press the key again to switch back to the measuring mode.
5.1.5 By means of the „SELECT“ key
5
, the secondary or third function of the
rotary switch position can be selected.
Note:
- Function % describes the pulse duty factor of periodic signals: [%] =
T1
T
5.1.6
The „RANGE“ key
6
is intended for shifting the manual measuring ranges and
masking the „AUTO“ symbol on the display at the same time. Select the automatic
range selection by pressing the key for approx. 1 second („AUTO“ is shown on the
display). In the position of the rotary switch, a relative value function „REL ∆“ is
assigned to the „RANGE“ key. By pressing the key, the applying measured value
is stored and the difference (offset) between the stored measured value and the
following measured values is displayed. The relative value function „REL ∆“ allows
a null balance of the capacity range with the measuring leads not being connected.
By pressing the key, the device is switched back to normal operating mode.
5.1.7 The nominal measuring rate of the BENNING MM P3 is 3 measurements per
second for the digital display.
5.1.8 The BENNING MM P3 can be switched on or off by means of the rotary
switch
7
. Switched off: position „OFF“.
5.1.9 The BENNING MM P3 switches off automatically after approx. 30 minutes
(APO, Auto-Power-Off). Automatic switch-off can be deactivated by pressing
the „RANGE“ key and by simultaneously switching on the BENNING MM P3
from the switching position „OFF“.
5.1.10 Temperature coefcient of the measured value: 0.2 x (stated measuring ac-
curacy)/ °C < 18 °C or > 28 °C, related to the value for the reference tempera-
ture of 23 °C.
5.1.11 The BENNING MM P3 is supplied by means of two 1.5 V batteries (LR44).
5.1.12 If the battery voltage falls below the specied operating voltage of the BEN-
NING MM P3, a battery symbol
appears on the display
.
5.1.13 The battery life is approx. 100 hours (alkaline battery).
5.1.14
Dimensions of the device: (L x W x H) = 132 x 86 x 19 mm with protective case
Weight: 130 g with protective case and batteries
5.1.15 The safety measuring leads are designed in 2 mm plug-in technology.
The
connected safety measuring
leads
comply with the nominal voltage of the
BENNING MM P3.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning MM P3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning MM P3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info