693645
25
Zoom out
Zoom in
Previous page
1/32
Next page
The ceramic reflector is not
installed in the boiler.
Install the ceramic reflector according to
the user’s manual.
The firing flap in the boiler
is open.
Using the handle of firing flap and cleaner,
close the firing flap and secure it with the
locking screw with plastic head.
Low chimney draught. Ensure the inspection of the chimney
draught at the service chimney company. If
the draught value is lower than the required
value (see users manual) the adjustment
of the chimney is required.
Fire door and/or the upper
boiler cover and/or the fuel
container cover are not
closed properly.
Close the fire door and/or the upper cover
of the boiler and/or the fuel container
cover.
The sealing gasket at the
fire door or at the upper
boiler cover was worn
out/damaged
Change the sealing gasket.*
The rubber sealing of the
fuel container cover is
damaged.
Change the rubber sealing.*
Smoke appears in the
fire room or in the fuel
container.
The fuel container is empty. Fill the fuel container with fuel.
Low amount of agitated air. Raise the ventilator capacity (see
Instruction Control Unit manual).
The boiler is repeatedly
overheated
Set the boiler capacity to the nominal
capacity (see Instruction Control Unit
manual).
The grate is full of dust and
ash.
Clean the grate.
The boiler is coated
with smoke particles
in a short period of
time.
The ventilator is broken. Change the boiler ventilator.*
The ash on the grate
forms clogs.
Recommended fuel was not
used for burning.
Fill the container with appropriate fuel (see
chapter 3).
The fuel dosage is wrong. Lower the dosage of fuel in the burner (see
the Instruction Control Unit manual).
The fuel used for burning is
wet.
Fill the container with appropriate (dry) fuel.
A great quantity of
unburned fuel
appears in the
ashtray.
The power of the ventilator
is wrongly set and the
stream of air blows the fuel
out of the burner.
Lower the ventilator speed (see Instruction
Control Unit manual).
* - this activity can be maintained only by an authorized service company certified by company
BENEKOVterm s.r.o..
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benekov R100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benekov R100 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info