Manual Belrobotics BM2000 Big Mow (page 26 of 78) (English)

818966

Zoom out

Zoom in

1/78

Chapter 6 How Big mow BM2000 works

6.1.2 Go to charging station mode

Figure 22: Go to station mode

Whilst working, the robot checks the current conditions and its scheduled instructions. As a

consequence, at a certain moment, it will decide to return to its charging station. The reasons

for this could be:

• The battery needs charging.

When the battery voltage drops below a certain threshold, the robot will stop the cutting

heads in order to save energy. This means that the robot can navigate for longer and

increases the likelihood that the robot will reach the station before the battery is depleted.

• The scheduled work period is over.

• An external command has been issued.

The robot can use various methods to return to the station:

• The robot moves towards a station loop wire using the track border :

- How the robot returns to the station from a single field (page 26).

- How the robot returns to the station from multiple fields (page 28).

• The robot uses GPS defined navigation points (page 29) to locate the station.

Note: When a robot fails to dock to the station or loses contact with the charging arm,

it will depart from the station, go around the loop on the track wire and try to re-dock.

This improves the chances of docking correctly and avoids discharging the battery.

6.1.2.1 Return to station loop from a single field

The default method to return to the station involves the robot following the track border. This

is shown in the figure below. It is also possible for the robot to Return to station using GPS

(page 29).

26 Big mow BM2000 User's Manual Version: Release 4.5.0 Last updated: 2022-08-20

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Belrobotics BM2000 Big Mow in the language / languages: English as an attachment in your email.

The manual is 4.37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Belrobotics BM2000 Big Mow Manual

Product: