630725

Belion GK604ZB10 Manual

10
Zoom out
Zoom in
Previous page
1/28
Next page
10
Replacing the burner nozzles
After having replaced the gas connecting piece on the
appliance to be converted to another gas type, all burner
nozzles must be replaced. The following steps must be
observed:
1. Turn off all switches on the control panel.
2. Shut off the gas supply.
3. Remove the pan support and burner parts.
4. Remove the burner nozzles (Allen key 7).
5. To identify the burner nozzles, see the table in the section
entitled "Technical properties - gas".
Insert the new nozzles in the corresponding burners.
Once the nozzles have been replaced, perform a leak test. See
the section entitled "Leak test".
Adjusting or replacing the bypass nozzles
The bypass nozzles regulate the minimum flame height of the
burners.
Preparation
Shut off the gas supply.
: Risk of electric shock!
Disconnect the appliance from the power supply.
1. Turn off the switches on the control panel.
2. Pull of all handles carefully upwards.
To adjust or replace the bypass nozzles when converting
from natural gas to liquid gas:
For models with two-hand spark ignition (with igniter)
(optional):
Fully close the bypass nozzles at the tap openings on the hob
plate.
The bypass nozzles of the burners can be adjusted via the tap
openings, which can be seen if the control knobs are pulled off
the control panel. To do this, use a flat head screwdriver (no. 2)
to fully screw in the bypass nozzles in the tap openings (make
sure that the cables are not damaged in the process).
For models with one-hand spark ignition (with automatic
igniter) (optional):
To reach the bypass nozzles, the hob plate must be removed.
To do this, read the section entitled "Removing the hob plate".
After the hob plate has been removed, the ignition group on the
gas taps must be removed.
The bypass nozzles must then be screwed in fully.
Then the ignition group must be refitted and the hob plate
installed as described in the section entitled "Installing the hob
plate".
To adjust or replace the bypass nozzles when converting
from natural gas to liquid gas:
For models with two-hand spark ignition (with igniter)
(optional):
All of the appliance's bypass nozzles must be replaced. To do
this, read the section entitled "Removing the hob plate".
The instructions in the section entitled "Replacing the bypass
nozzles" must then be followed.
Then, follow the instructions in the section entitled "Installing the
hop plate".
For models with one-hand spark ignition (with automatic
igniter) (optional):
All of the appliance's bypass nozzles must be replaced. To do
this, read the section entitled "Removing the hob plate".
After the hob plate has been removed, the ignition group
located on the gas taps must be removed. The instructions in
the section entitled "Replacing the bypass nozzles" must then
be followed.
Then reinstall the ignition group and follow the instructions in
the section entitled "Installing the hop plate".
6:

… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Belion GK604ZB10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Belion GK604ZB10 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Belion GK604ZB10

Belion GK604ZB10 User Manual - English, Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info