630725
11
Zoom out
Zoom in
Previous page
1/28
Next page
11
Removing the hob plate
1. Remove the pan support, the handles and burner parts.
2. Loosen the hob plate burner connection screws.
3. For models with electric hotplate (optional): After loosening
the burner screws, turn the hob over and remove the
connection nut for the electric hotplate.
4. Grip the hop plate at the sides with both hands and lift it
carefully.
Replacing the bypass nozzles
1. Loosen the bypass nozzles with a flat head screwdriver (no.
2). Unscrew the bypass nozzles.
2. You can use the table to determine the new bypass nozzles
that you will need after the gas conversion. See the section
entitled "Technical properties - gas".
3. Check whether the seals on the bypass nozzles are correctly
seated and work precisely. Only use bypass nozzles with
intact seals.
4. Insert the new bypass nozzles and tighten them. Make sure
that all bypass nozzles are connected to the correct shut-off
valves.
5. At this point, it is essential to carry out a leak test. See the
section entitled "Leak test".
Installing the hob plate
Carry out installation in the reverse order.
1. Make sure that the cables are not damaged and the
connections are not detached.
For models with one-hand spark ignition (optional): Carefully
install the ignition group.
2. Carefully replace the hob plate. Screw in the hob plate burner
screws again.
Caution!
Ensure that the connections are not damaged by the
thermocouple and ignition plug.
3. For models with electric hotplate (optional): After fixing the
burner screws, turn the hob over and install the connection
nut for the electric hotplate.
After adjusting or replacing the bypass nozzles
1. Refit the burner cups according to their size, making sure that
the ignition plug catches precisely in the opening at the edge
of the burner cup. Place the enamel burner caps (paying
attention to their size) precisely on the burner cups.
2. Replace the pan supports. When doing so, make sure that
the pan support with the 80 mm span width is placed on the
auxiliary burner.
3. Carefully replace the control knob.
4. At this point, it is important to check the burner flame
behaviour. See the section entitled "Correct flame behaviour".
5. Also check that the appliance functions operate correctly.

11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Belion GK604ZB10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Belion GK604ZB10 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Belion GK604ZB10

Belion GK604ZB10 User Manual - English, Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info