630725
8
Zoom out
Zoom in
Previous page
1/28
Next page
8
Enter the newly-set type of gas and gas pressure in the table.
See the section entitled "Measures to be observed".
Caution!
After the appliance has been converted to a different gas type,
the labels giving information on the gas type and showing a
star must be affixed at the appropriate point on the rating plate
MAKE SURE THAT YOU DO THIS.
Functional parts for the gas conversion
The functional parts that are required for the gas conversion in
accordance with the instructions are displayed below.
You will find the correct nozzle diameters in the table in the
section entitled "Technical properties - gas".
Always use new seals.
The gas connecting piece to be used may vary depending on
the gas type and country-specific regulations.
(*) These functional parts must be used when the gas is
connected.
Conversion from natural gas to liquid gas
(LPG)
If the appliance is to be converted from natural gas
(NG: G20, G25) to liquid gas (LPG: G30, G31):
If liquid gas (LPG) is used, the gas connection is established
via a gas hose or a fixed connection.
1. The natural gas adapter on the appliance must be replaced
with a gas connection hose. First remove the safety hose or
gas line, if present, from the appliance.
To do this, disconnect the threaded connection piece on the
gas line or the safety hose (with a size 24 key) from the
connecting piece on the appliance (with a size 24 key).
Figure 1.
Disconnect the connecting piece (with a size 24 key) from
the end of the gas connection (with a size 22 key). Figure 2.
2. Place the new seal on the connecting piece. Make sure that
the seal is correctly seated.
3. Attach the connecting piece (with a size 24 key) to the end of
the gas connection (with a size 22 key).
4. Insert the safety hose and tighten using a screw coupling or
hose clamp.
5. To perform a leak test, see the section entitled "Leak test".
Open the gas supply.
Note: A torque spanner should be used when converting the
gas type.
Bypass nozzle
Burner nozzle
(*) Seal
(*) Connecting piece for natural
gas
(NG: G20, G25)
(TS 61-210 EN 10226 R
^)
EN 10226 R
^
(*) Connecting piece for natural
gas
(NG: G20, G25)
(TS EN ISO 228 G
^)
EN ISO 228 G
^
(*) Connecting piece for liquid gas
(LPG: G30, G31)
Gas connecting piece
6:

6:

6:

6:

6:

6:

/3***

1P
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Belion GK604ZB10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Belion GK604ZB10 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Belion GK604ZB10

Belion GK604ZB10 User Manual - English, Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info