757592
27
Zoom out
Zoom in
Previous page
1/83
Next page
27 / EN
Washing Machine / User’s Manual
Follow on-screen instructions until the HomeWhiz app asks you about the product you wish to connect to
your smart device.
Return to the HomeWhiz app and wait until the setup is complete. Once the setup is complete, give your
washing machine a name and confirm. You can now tap the screen to see the product you have added to the
HomeWhiz App.
CIf you cannot complete the setup successfully in 5 minutes, the washing machine will switch off automatically. In this case,
you will have to start over the setup procedure. If the problem persists, please contact the Authorised Service Agent.
You can use your washing machine with more than one smart device. To do this, download the HomeWhiz app on the other smart
device as well. After launching the app, you will need to sign in to your account you have previously created and paired with your
washing machine. Otherwise, please read “Setting up a washing machine that is connected to someone else’s account”.
CThe HomeWhiz application may ask you to enter the product number stated on the label of
the product. Product label is found on the inner side of the product door. Product number is
written on this label.
4.3.15.2 Setting up a washing machine that is connected to someone else’s account
If the washing machine you want to use has previously been registered in the system with someone else’s
account, you need to establish a new connection between the HomeWhiz App and the product.
Download the HomeWhiz App on the new smart device you want to use.
Create a new account and log in to this account on the HomeWhiz app.
Follow the steps in the HomeWhiz Setup (4.3.15.1 HomeWhiz Setup) to complete the setup.
CSince the HomeWhiz and Remote Control functions of your product work through pairing via Bluetooth, the product can be
run by only one HomeWhiz app at a time.
4.3.15.3 Using the Remote Control function
After HomeWhiz setup, Bluetooth will turn on automatically. To enable or disable the Bluetooth connection,
please see 4.3.8.2 Bluetooth 3’’.
If you switch your machine off and on while Bluetooth is enabled, it will reconnect automatically. If the paired
device goes out of the range, the Bluetooth connection will turn off automatically. For this reason, you will need
to turn on Bluetooth again if you want to use the Remote Control function.
You can check the Bluetooth symbol on the display to follow the connection status. If the symbol is on, this
means that the Bluetooth connection is established. If the symbol is established, the product is trying to
connect. If the symbol is off, this means that you have no connection.
AWARNING: If the Bluetooth connection is enabled on your product, you can select the Remote Control function.
If the Remote Control function cannot be selected, check the connection status. If the connection fails, repeat the initial set-
up settings on the appliance.
WARNING: For safety reasons, the product’s door will remain locked while the Remote Control function is enabled,
independently of the operating mode. If you want to open the door of the product, you will need to turn the programme
selection knob or press the remote control key to deactivate the remote control function.
If you want to control your washing machine remotely, enable the Remote Control function by pressing the
Remote Control button while the programme knob is in the Programme Download/Remote Control position on
the control panel. Once the product is accessed, you will see a screen similar to the one below.
When Remote Control is enabled, you can only manage and switch off the machine and follow status on the
washing machine. All functions except child lock can be managed through the application.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WTV8741BSCDOS1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WTV8741BSCDOS1 in the language / languages: English, German as an attachment in your email.

The manual is 7,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO WTV8741BSCDOS1

BEKO WTV8741BSCDOS1 User Manual - Dutch, French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info