757592
26
Zoom out
Zoom in
Previous page
1/83
Next page
26 / EN Washing Machine / User’s Manual
4.3.14 End of programme
Once the programme is completed, the End symbol will be displayed.
If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all indicators
are turned off.
Completed programme steps will be displayed if you press any button.
4.3.15 HomeWhiz and Remote Control Functions.
HomeWhiz allows you to use your smart device to control your washing machine and get information about it.
Thanks to the HomeWhiz application, you can use your smart device to carry out some procedures you can
also do on the machine. Plus, you can use some features only with the HomeWhiz function.
To use the Bluetooth function of your machine, you should download the HomeWhiz app from the application
store of your device.
Make sure that your smart device is connected to internet to download the app.
If you are using the app for the first time, please follow the on-screen instructions to complete the user
registration process. Once the registration is complete, you can use all products with the HomeWhiz feature in
your house on this account.
On the HomeWhiz app, you can tap “Add/Remove Appliance” to see the products paired with your account.
You can pair these products on this page.
After installing the application, the HomeWhiz function will allow the machine to send you push notifications
via your smart device.
CTo be able to use the HomeWhiz function, make sure that the app is installed on your smart device and that your washing
machine is paired with your smart device via Bluetooth. If the washing machine is not paired with your smart device, it will
function as an appliance without the HomeWhiz feature.
Your product will run once it is paired with your smart device via Bluetooth. Checks performed on the app will be enabled
through this pairing. For this reason, the Bluetooth signal between the product and the smart device must be strong enough.
Please visit www.homewhiz.com to see the Android and iOS versions supported by the HomeWhiz application.
AWARNING: All the safety measures described in "GENERAL SAFETY INSTRUCTIONS" section of your user
manual apply to the remote operation through HomeWhiz function as well.
4.3.15.1 HomeWhiz Setup
Your product and the HomeWhiz app must be connected for the app to run. To establish this connection,
please follow the steps below for setup both on your product and on the HomeWhiz App.
If you are adding an appliance for the first time, tap “Add/Remove Appliance” on the HomeWhiz App.
Then tap “Tap here to setup new appliance”. Follow the steps below as well as the instructions on the
HomeWhiz App to complete the setup.
To start the setup process, make sure that your machine is switched off. Press and hold the Temperature
button and the Remote Control Function button simultaneously for 3 seconds to switch your machine to
HomeWhiz setup mode.
While the device is in HomeWhiz setup mode, you will see an animation on the display, and the Bluetooth
icon will flash until the machine is paired with your smart device. In this mode, only the programme button is
enabled. Other buttons are disabled.
On the screen of the app, select the desired washing machine and tap Next.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WTV8741BSCDOS1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WTV8741BSCDOS1 in the language / languages: English, German as an attachment in your email.

The manual is 7,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO WTV8741BSCDOS1

BEKO WTV8741BSCDOS1 User Manual - Dutch, French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info