757592
25
Zoom out
Zoom in
Previous page
1/83
Next page
25 / EN
Washing Machine / User’s Manual
4.3.12 Changing the selections after programme has started
Adding laundry after the programme has started :
When you press the Start / Pause button, if the level of water inside the machine is suitable (if add laundry
icon is on), the door lock will be disabled and the door will open so that you can add laundry. When the
door lock is disabled, the door lock symbol on the display will disappear. After adding the laundry, close the
door and press Start/Pause again to continue the washing cycle.
When you press Start/Pause , if the water level in the machine is not sufficient (if add laundry icon is
off), the door lock will not be disabled and the door lock symbol will still be shown on the display.
CIf the temperature of the water inside the machine is above 50°C, you cannot disable the door lock even if the water level
is suitable.
Switching the machine to pause mode:
Press the Start/Pause button to switch the machine to pause mode. Start / Pause symbol will flash on the display.
Changing the programme selection after the programme has started:
If Child Lock is not enabled, you can change programme by turning the programme selection knob while the
current programme is running. This will cancel the current programme.
CThe selected programme will start anew.
Changing the auxiliary function, speed and temperature
Depending on the step the current programme has reached, you can cancel or enable auxiliary functions. See
“Auxiliary function selection”
You can also change the speed and temperature settings. See "Spin speed selection" and "Temperature selection".
CIf the temperature of the water inside the machine is high or if the water level is above the door line, the loading door will
not open.
4.3.13 Cancelling the programme
The programme will be cancelled if the programme selection knob is switched to another programme or if the
machine is switched off and on with this button.
CThe programme will not be cancelled if you turn the programme selection knob while child lock is enabled. You should cancel
the Child Lock first.
If you want to open the loading door after you have cancelled the programme but you cannot do it since the water level in the
machine is above the loading door baseline, turn the Programme Selection knob to Pump+Spin programme and discharge
the water in the machine.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WTV8741BSCDOS1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WTV8741BSCDOS1 in the language / languages: English, German as an attachment in your email.

The manual is 7,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO WTV8741BSCDOS1

BEKO WTV8741BSCDOS1 User Manual - Dutch, French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info