660554
7
Zoom out
Zoom in
Previous page
1/15
Next page
3. X32 Setup
• MADI Mode selects either AES10-1991/56-channel or
AES10-2003/64-channel operation
• MADI Chan In selects the start channel for the block of
32-ch that will be available for input routing: MADI ch 01,
ch 09, ch 17, ch 25, ch 33 (in 64 channel mode)
• MADI Chan Out selects the start channel for the block
of 32-ch that will be replaced in the MADI output stream:
MADI ch 01, ch 09, ch 17, ch 25, ch 33 (in 64 channel mode)
• MADI Source selection boxes for MADI connection – ber-
optic and/or coaxial. Select both for redundant use of coaxial
and ber-optic connections.
• X-MADI card can be selected as the clock source on the
X32 Setup/cong page. In that case, the X32 will be slaved
to the MADI clock received on BNC input or ber-optic
inputs. Note that this may require rebooting the console
if the internal and external clock rates are dierent
(i.e. 44.1/48 kHz).
4. Connector Plate
• Dual BNC coaxial input and outputs, 75 Ohm
• Cables up to 100 meters in length may be used.
• SC-plug duplex ber-optic connector (IEC874-19)
• Use SC duplex connectors and multimode ber-optic
cable with 50-micron core / 125-micron cladding
diameters, or a 62.5-micron core / 125-micron
cladding diameters.
• Cables up to 2 km in length may be used.
• 2x small handles for removing the expansion card
from the slot
• 2x M3x6 screws for fastening the card in the slot
• 3 countersunk M3 screws for xing the pcb.
Don’tloosenthese!
5. Specications
Connectors
Duplex bre-optic, SC-plug, IEC874-19 1
MADI (AES10) BNC INPUT 1
MADI (AES10) BNC OUTPUT 1
Input/Output Characteristics
Channels of input/output to X32, max. 32 / 32
Channels of input/output to MADI (AES10-2003) 64 / 64
Sample rates 44.1 kHz / 48 kHz
Sample word length 24 Bit
Clock synchronization selectable
internal/Local or
BNC clock input or
bre optic input
Round-trip latency <150 µs
Cable Length
Fibre-optic, multimode cable, max
(125 µm cladding, 50/62.5 µm core)
2 km
BNC, coaxial 75-Ohm, max 100 m
12 13Quick Start GuideEXPANSION CARD X-MADI
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer EXPANSION CARD X-MADI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer EXPANSION CARD X-MADI in the language / languages: English, German, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info