660554
13
Zoom out
Zoom in
Previous page
1/15
Next page
24 25Quick Start GuideEXPANSION CARD X-MADI
3. Conguração do X32
• O Modo MADI seleciona ou operação de canal AES10-
1991/56 ou de canal AES10-2003/64
• O MADI Chan In seleciona o canal de início para o bloco de
32-ch que estará disponível para o roteamento de entrada:
MADI ch 01, ch 09, ch 17, ch 25, ch 33 (no modo channel 64)
• MADI Chan Out seleciona o canal de início para o bloco de
32-ch que será substituído no uxo da saída MADI: MADI ch
01, ch 09, ch 17, ch 25, ch 33 (no modo channel 64)
• Quadros de seleção MADI Source para conexão MADI– bra
ótica e/ou coaxial. Selecione ambos para uso redundante de
conexões coaxiais e de bra ótica.
• O cartão X-MADI pode ser selecionado como fonte do relógio
na página X32 Setup/cong. Neste caso, o X32 estará em
modo slave com o relógio MADI recebido na entrada BNC
ou entradas de bra ótica. Observe que pode ser necessário
fazer a reinicialização da mesa se as taxas de relógio interno
e externos forem diferentes (ex. 44.1/48 kHz).
4. Placa Conectora
• Entradas e saídas coaxiais duplas BNC, 75 Ohm
• Cabos de até 100 metros de comprimento podem
serusados.
• Conector de bra ótica SC-plug duplex (IEC874-19)
• Use conectores duplex SC e cabo de bra ótica
multimodal com núcleo de 50 micra / diâmetros de
revestimento de 125-micra, ou núcleo de 62.5-micra /
diâmetros de revestimento de 125 micra.
• Cabos de até 2 km de comprimento podem ser usados.
• 2x pequenas alças para remoção do caro de expansão do slot
• 2x parafusos M3x6 para prender o cartão no slot
• 3x parafusos de cabeça escareada M3 para xação do pcb.
Não os afrouxe!
5. Dados Técnicos
Conectores
Fibra ótica Duplex, plugue SC, IEC874-19 1
ENTRADA MADI (AES10) BNC 1
SAÍDA MADI (AES10) BNC 1
Características da Entrada/Saída
Canais de entrada/saída para o X32, máx. 32 / 32
Canais de entrada/saída para o MADI (AES10-2003) 64 / 64
Taxas de amostragem 44,1 kHz / 48 kHz
Comprimento do sample word 24 Bit
Sincronização de relógio selecionável
Entrada de relógio ou entrada
de bra ótica interna/local
ou BNC
Latência de ida e volta <150 μs
Comprimento do Cabo
Fibra ótica, cabo de modos múltiplos, máx
(125 μm de revestimento, 50/62.5 μm de núcleo)
2 km
BNC, coaxial 75-Ohm, máx 100 m
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer EXPANSION CARD X-MADI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer EXPANSION CARD X-MADI in the language / languages: English, German, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info