Manual Beem Leopard G5 (page 24 of 56) (English, German, Dutch, French)

522388

Zoom out

Zoom in

1/56

Leopard G5 EN

BEEM - Elements of Lifestyle

Operation and use

Notes

Using as mincer

If you wish to make very ne mince, ■

you can feed the meat through several

times (initially use a perforated disc

with large holes and then one with

smaller holes).

You can chop the ingredients (e. g., ■

onions) together with the mince.

Inedible parts such as bones, gristle ■

or tendons must be removed before

mincing.

Dice the meat rst so that it ts into the ■

feed shaft.

Making sausages

Soak the sausage skin in lukewarm ■

water for 10 minutes. Push the wet

sausage skin over the sausage lling

shaft. Sausage skins can be obtained

at the butchers.

Season the mince and put it into the ■

funnel.

If the sausage skin is sticky, dampen it ■

again with a little lukewarm water.

Numerous recipes are available in the ■

Internet. For example, it is possible to

individually season each one with dif-

ferent spices until the desired avour

has been found.

Using the Kebbe attachment

Kebbe (Kibbeh Mischwiye) is lled meat

rolls. A hollow roll is made with the Kebbe

attachment that can be cut to the desired

length and lled with various different in-

gredients (e. g., meat, vegetables). The

Kebbe portions are subsequently fried.

Switching the appliance on/off

Move switch B (8) followed by switch 

A (7) to the "ON" position to switch on

the appliance.

Move switch A (7) to position "0" (mid- 

dle position) to switch off the appli-

ance.

Using the appliance

Assemble the attachment as de- 

scribed in the section Assembling

the attachment (page 20).

Insert the plug into the mains socket. 

Switch on the appliance as described 

in the section Switching the appli-

ance on/off (page 22).

Put a suitable container under the 

outlet.

Cut the ingredients into pieces to t 

into the feed shaft.

Add the ingredients into the feed shaft 

Press the ingredients downwards us- 

ing the pusher (2) until the feed shaft

is empty.

Eliminating blockages

Switch off the appliance as described 

in the section Switching the appli-

ance on/off (page 22).

Move switch B (8) to position "R". 

Move switch A (7) to position "R" and 

hold down for max. 10 seconds. When

you release the button, it springs back

to position "0".

Pull the plug out of the mains socket. 

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beem Leopard G5 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beem Leopard G5 Manual

Product: