522388

Beem Leopard G5 Manual

22
Zoom out
Zoom in
Previous page
1/56
Next page
20
Leopard G5 EN
BEEM - Elements of Lifestyle
Appliance description
(See illustration on the left fold-out page)
Lid, pusher1
Pusher2
Tray3
Release button4
Handle5
Motor unit6
Switch A7
Switch B8
Fixture9
feed shaft10
Attachment11
Drive pinion12
Screw conveyer13
Mincing knives14
Perforated disc15
15a Small perforated disc (Ø 3 mm)
15b Medium perforated disc (Ø 5 mm)
15c Large perforated disc (Ø 7 mm)
Locking ring16
Pusher for shortbread biscuits17
Shortbread biscuit attachment18
Sausage lling disc19
Kebbe attachment20
Kebbe shaper21
Sausage lling shaft 122
Sausage lling shaft 223
User manual (not illustrated)24
Switch positions
Switch A (7) and switch B (8) at "ON" ■
position: normal operation
Switch A (7) at "0" position: appliance ■
switched off
Switch A (7) and switch B (8) at "R" ■
position: reverse operation
Overload protections
The motor is protected against overload-
ing by a thermal circuit breaker. It stops
automatically in the event of overloading.
In this case, switch off the appliance and
allow it to cool for approx. 60 minutes.
CAUTION
Observe the maximum operating ►
time of 10 minutes.
Allow the appliance to cool down ►
afterwards for 30 minutes before it is
switched on again.
Preparations
Preassembly
Using as mincer (image A)
Insert the screw conveyer (13) into the
attachment (11).
Insert the mincing knife (14) with
the blades facing outwards into the
square of the conveyer screw.
Put the desired perforated disc (15a,
15b, 15c) onto the screw. The notch in
the perforated disc must lie over the
keyway of the attachment (image E).
Screw on the locking ring (16).
Making sausages (image B)
Insert the screw conveyer (13) into the
attachment (11).
Put the sausage lling disc (19) onto
the screw. The notch in the sausage
lling disc must lie over the keyway of
the attachment.
Insert the desired sausage lling shaft
(21, 22) through the locking ring (16).
Screw on the locking ring (16).
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beem Leopard G5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beem Leopard G5 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info