765607

BeamZ 154.090 - DMX-240 Manual

11
Zoom out
Zoom in
Previous page
1/16
Next page
Scenes
A. Inserting a Scene
Press and hold the PROGRAM button (11) to enter the programming mode.
Select the desired chaser using the CHASER buttons (22). The respective LEDs will be lit.
Press the TAP / DISPLAY button (17) to switch to the step mode. The display will show the scenes in the
chaser.
Select the scene where the new scene is to be inserted using the BANK buttons (15 and 16). If you want to
insert scene between scene 5 and 6, press the BANK UP / DOWN button (15 or 16) until the display shows
STEP05.
Press the MIDI / REC button (19) to prepare for inserting. The display shows the next scene.
Select the bank where the scene is to be inserted using the BANK buttons (15 and 16).
Select the scene to be inserted using the SCENE buttons (3).
Press the MIDI / REC button (19) to insert the scene. All the LEDs on the panel will flash.
B. Copying a Scene
Press and hold the PROGRAM button (11) to enter the programming mode.
Select the bank in which the scene will be copied using the BANK buttons (15 and 16).
Select the scene you want to copy using the SCENE buttons (3).
Press the MIDI / REC button (19) to prepare for copying.
Select the bank where you desire to copy the scene to using the BANK buttons (15 and 16).
Press the desired SCENE button (3). All LEDs on the panel will flash.
C. Deleting a Scene
Press and hold the PROGRAM button (11) to enter the programming mode.
Select the bank in which the scene will be deleted using the BANK buttons (15 and 16).
Press and hold the AUTO / DEL button (21).
Select the desired chaser using the CHASER selection buttons (21).
Press the SCENE button (3) corresponding to the scene to be deleted.
The scene has been deleted. All the LEDs on the panel will flash. All 240 DMX channels of the deleted
scenes will be set to 0.
D. Deleting all Scenes
CAUTION: When you select this function, all programmed scenes will irrevocably be lost.
Press and hold the PROGRAM button (11) and the BANK DOWN button (16) while disconnecting the device
from the mains.
Connect the device back to the mains.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ 154.090 - DMX-240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ 154.090 - DMX-240 in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info