765607

BeamZ 154.090 - DMX-240 Manual

10
Zoom out
Zoom in
Previous page
1/16
Next page
Running a Chaser
o Press the respective CHASER buttons (22) and press the AUTO / DEL (21). Adjust the chaser speed by pressing
the TAP button (17) twice. The time interval between two presses determines the speed (up to 10 minutes).
o Press the MIDI / REC button (19) and select the desired record using the SCANNER selection buttons (1).
Checking a Chaser
o Press and hold the PROGRAM button (11) and select the desired chaser using the CHASER buttons (22).
o Press the DISPLAY button to switch the display to step mode. Check every scene individually by pressing the
respective BANK button (15 and 16).
Editing a Chaser
A. Copying a Bank into a Chaser
Press and hold the PROGRAM button (11) to enter the programming mode.
Select the desired chaser using the CHASER buttons (22). The respective LEDs will be lit.
Select the bank to be copied using the BANK buttons (15 and 16).
Press the MUSIC / BANK COPY button (12) to prepare for copying.
Press the MIDI / REC button (19) to copy the bank. All LEDs on the panel will flash.
B. Copying a Scene into a Chaser
Press and hold the PROGRAM button (11) to enter the programming mode.
Select the desired chaser using the CHASER buttons (22). The respective LEDs will be lit.
Select the bank in which the scene will be copied using the BANK buttons (15 and 16).
Select the scene you want to copy using the SCENE buttons (3).
Press the MIDI / REC button (19) to copy the scene. All LEDs on the panel will flash.
C. Inserting a Scene into a Chaser
Press and hold the PROGRAM button (11) to enter the programming mode.
Select the desired chaser in which the scene will be inserted using the CHASER buttons (22). The respective
LEDs will be lit.
Press the TAP / DISPLAY button (17) to switch to the step mode.
Select the scene where the new scene is to be inserted using the BANK buttons (15 and 16). Now, the
display will show the scene. If you want to insert scene between scene 5 and 6, press the BANK UP / DOWN
button (15 or 16) until the display shows STEP05.
Press the MIDI / REC button (19) to prepare for inserting. The display shows the next scene.
Select the bank where the scene is to be inserted using the BANK buttons (15 and 16).
Select the scene to be inserted using the SCENE buttons (3).
Press the MIDI / REC button (19) to insert the scene. All the LEDs on the panel will flash.
D. Deleting a Scene in a Chaser
Press and hold the PROGRAM button (11) to enter the programming mode.
Select the desired chaser in which the scene will be deleted using the CHASER buttons (22).
Press the TAP / DISPLAY button (17) to switch to the step mode.
Select the scene to be deleted using the BANK buttons (15 and 16).
Press the AUTO / DEL button (21) to delete the scene. All the LEDs on the panel will flash.
E. Deleting a Chaser
Press and hold the PROGRAM button (11) to enter the programming mode.
Select the desired chaser using the CHASER selection buttons (22).
Press and hold the AUTO / DEL button (21) and the respective CHASER button (22) to delete the chaser. All
the LEDs on the panel will flash.
F. Deleting all Chasers
CAUTION: When you select this function, all programmed chasers will irrevocably be lost. The
individual scenes and programs will still be maintained.
Switch off the device.
Press and hold the BANK DOWN button (16) and the AUTO / DEL button (21) while switching on the device.
All LEDs on the panel will flash.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ 154.090 - DMX-240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ 154.090 - DMX-240 in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info