765607

BeamZ 154.090 - DMX-240 Manual

9
Zoom out
Zoom in
Previous page
1/16
Next page
DMX operation
A bank is a sequence of different scenes that will be called up one after another. With the DMX-240 controller you can
program up to 30 different banks, each bank containing up to 8 scenes.
Assigning a Jog Wheel to a Channel
o Choose your channel.
o Press MIDI / REC (19) to confirm.
Programming a Scene
o Press and hold the PROGRAM button (11) for 2 seconds to enter the programming mode. The PROGRAM LED will
flash.
o Select the desired scanner using the SCANNER selection buttons (1).
o Adjust the settings (the value will be shown in the display) using the respective CHANNEL faders (4).
o Press the MIDI / REC (19) to prepare saving mode.
o Select the desired bank (01 ~ 30) which will be saved through the BANK buttons (15 and 16).
o Press one of the SCENE buttons (3) in order to save the data. All LEDs on the panel will flash indicating the data is
saved.
o Select the next scanner using the SCANNER selection buttons (1) and repeat the steps above until programming is
finished or the maximum number of steps (8) has been reached.
o Press and hold the PROGRAM button (11) to exit the programming mode.
Running a Program
o Press the BANK buttons (15 and 16) and select the desired bank.
o Press the AUTO / DEL button (21). The auto LED will light.
o Adjust the speed using the SPEED fader (23) and the repetition rate using the FADE TIME fader (24).
o You can also adjust the speed by pressing the TAP button (17) twice. The time interval between two presses
determines the speed (up to 10 minutes).
Checking a Program
o Press and hold the PROGRAM button (11) and select the desired bank using the BANK buttons (15 and 16).
o Check every scene individually by pressing the respective SCENE button (3).
Editing a Program
o When programs have to be edited, it is necessary to modify a scene manually.
o Press and hold the PROGRAM button (11) to enter the programming mode.
o Select the program to be edited using the BANK buttons (15 and 16).
o Select the desired scanner using the SCANNER buttons (1).
o Adjust the desired settings using the respective CHANNEL faders (4).
o Press the MIDI / REC button (19) to prepare for saving.
o Select the desired scene using the SCENE button (3) and save.
Copying a Program
o Press and hold the PROGRAM button (11) to enter the programming mode.
o Select the desired bank using the BANK buttons (15 and 16).
o Press the MIDI / REC button (19) to prepare for copying.
o Select the target bank using the BANK buttons (15 and 16).
o Press the MUSIC / BANK COPY button (12) to copy the bank. All LEDs on the panel will flash.
CHASERS
A chaser is a sequence of different banks that will be called up one after another. With this DMX-240 controller you
can program up to 6 different chasers, each chaser up to 240 scenes.
Programming a Chaser
o Press and hold the PROGRAM button (11) to enter the programming mode.
o Select the desired chaser using the CHASER selection buttons (22).
o Select the desired program using the BANK buttons (15 and 16).
o Select the desired scene using the SCENE selection buttons (3).
o Press the MIDI / REC button (19).
o Program the next step until the chaser is finished or the maximum number of scenes (240) has been reached.
o Press and hold the PROGRAM button (11) to save the chaser.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ 154.090 - DMX-240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ 154.090 - DMX-240 in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info