765605

BeamZ 154.062 - DMX-024PRO Manual

6
Zoom out
Zoom in
Previous page
1/11
Next page
General Description
This digital DMX ‘scene setter ‘ light controller can control 24 light channels and gives total dimmer control over all 24
outputs. It features 48 easily programmable memories with a storage capacity for 99 different light effect scenes per
memory. It can be set on automatic control or on music control via the built-in microphone or via an external audio signal.
The speed and fade time for the running light are also selectable. The digital DMX-512 control uses “addresses” for the
individual control of the connected light units. These outgoing addresses are pre-set to the numbers 1 to 24.
Controls and Functions
1) Indicator LEDs for the setting of the slider controls from section A.
2) 12 slider controls adjusting the light intensity of channel 1 to 12.
3) Push-buttons with ‘flash’ function for channel 1 to 12.
4) Indicator LEDs for the setting of the slider controls from section B.
5) LED indicating the active scenes.
6) Slider controls for the channels 13 to 24.
7) Flash buttons 13 to 24 allowing to completely switch on shortly one channel.
8) MASTER A slider control for the setting of the light intensity on channel 1 to 12 (section A) or on all 24 channels
simultaneously.
9) ‘BLIND’ button to exclude one or more channels simultaneously from a scene pattern. The light intensity of that channel will
then be determined by the appropriate slider control of the channel.
10) MASTER B slider control setting the light intensity of channels 13 to 24.
11) ‘HOME’ button to switch off the ‘Blind’ function.
12) Slider control for the setting of the fade time between the scenes.
13) TAP SYNC button to synchronize the STEP rhythm with the music.
14) SPEED slider control to set the STEP speed of the running light patterns.
15) ‘FULL-ON’ button to switch all outputs to 100% intensity.
16) AUDIO LEVEL slider control to set the sensitivity of the built-in microphone or of the audio signal that is fed into the LINE-IN
input.
17) BLACK OUT button switches all outputs to zero. The yellow LED is flashing.
18) STEP button to activate the following scene.
19) AUDIO button switches the music control on.
20) HOLD button stops the execution of all pattern steps.
21) PARK button to select between individual or mixed running light patterns.
22) REC EXIT button has two functions: a) in programming mode you can choose between ADD or KILL function of a scene, and
b) leave the programming mode.
23) RECORD button to store the scenes in programming mode.
24) PAGE/REC CLEAR button to select a memory page from 1 to 4.
25) MODE SELECT button to choose among automatic running light (red) or single (yellow) or double pre-set (green).
26) DARK button to switch all outputs to zero regardless of the FULL-ON button.
27) ALL REV/EDIT button: push to invert the running direction of all scenes.
28) % OR 0-255 button changes the indication on the display.
29) DELETE/REV ONE button inverts the running direction of a determined scene.
30) UP/CHASE REV button to invert the running direction of the current running light program.
31) DOWN/BEAT REV. Button inverts the running direction in music controlled mode.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ 154.062 - DMX-024PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ 154.062 - DMX-024PRO in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info