Manual Be Cool Pivot (page 64 of 144) (English, French, Italian, Portuguese, Spanish)

768106

Zoom out

Zoom in

1/144

that the child is comfortable and the straps are not too

tight, and check that the lap belt holds the child’s pelvis

snugly in position. The lower part of both shoulder pads

should be aligned horizontally and pull them down to the

lowest position.

Step 5.1-5.2-5.3: Using the harness buckle: bring the two

clips of the buckle together and connect them before

inserting them into the harness buckle. Make sure you

hear them click into place. Pull the clips of the buckle to

check that they are correctly inserted. To unfasten them,

press the red button.

Step 6:2. as shown in gure 6, for installation in the rear

facing position, if the child weighs less than 18 kg, the

correct seating position in the safety seat is level 1.

Step 7: as shown in gure 7, pull the headrest adjustment

handle upwards to set the headrest to the correct posi-

tion for the height of the child.

Attention: After settling the child in the seat, adjust the

headrest to the correct position. For installation in the

rear facing position, the shoulder pads should go slightly

above or even below the child’s shoulders

Attention: For group 1, the rear facing position in an

upright position, with reclining and with the additional

insert is only possible with this conguration.

Add the anti-collision sponge on the opposite side to

the anti-rotation strap.

Step 8: as shown in gure 8, add the anti-collision sponge

on the opposite side to the anti-rotation strap, as shown

in points 1-2-3 of the gure to fasten the anti-collision

sponge to the child safety seat.

INSTALLATION FOR GROUP I (9-18 KG)

IN THE FORWARD FACING POSITION

Note:

1. The safety seat is only suitable for use in the listed vehi-

cles tted with ISOFIX anchor systems and approved by

ECE regulation No. 14.

2. Correct installation for group 1 is in the forward facing

position and is suitable for children from 9 to 18 kg.

3. The child safety seat for group 1 has four seating posi-

tions which are levels 2,3,4 and 5.

4. Important: On car journeys, the seat must not be used

in a sideways position.

5. The group 1 insert is suitable for use with a child of

between 9-12 kg.

6. Do not use the safety seat in the forward facing posi-

tion until the child weighs over 9 kg.

a- ISOFIX installation for group 1

Step 1: as shown in gure 1, turn the safety seat forwards

(see the rotation function section on page 8). Then, pull

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Be Cool Pivot in the language / languages: English, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Be Cool Pivot Manual

Product: