Manual Be Cool Pivot (page 63 of 144) (English, French, Italian, Portuguese, Spanish)

768106

Zoom out

Zoom in

1/144

connector will automatically come out.

Step 3: as shown in gure 3, if you want to remove the

ISOFIX, pull the ISOFIX adjustment handle with one hand

and insert the ISOFIX connector into the base with the

other hand.

Step 4: as shown in gure 4, before inserting the two

ISOFIX connectors into the ISOFIX anchor points, the

ISOFIX indicator window will be red.

Step 5: as shown in gure 5, insert the two ISOFIX

connectors rmly into the ISOFIX anchor points on the

vehicle seat until you hear them click into place. Then

the ISOFIX indicator window will turn green. To release

the ISOFIX connectors, press the green button and the

indicator window will turn back to red.

Step 6: as shown in gure 6, with one hand pull the ISO-

FIX adjustment handle and with the other hand push the

base of the child safety seat to secure it. It is not neces-

sary to pull the ISOFIX adjustment handle if the ISOFIX

is locked.

b- Anti-rotation strap installation for group 0+1

Step 1: as shown in gure 1, pass the anti-rotation strap

through the guide slot for the rear facing position. Note:

The anti-rotation strap should be tted on the side op-

posite the car door to make it easier to use.

Step 2: as shown in gures 2 and 3, pull the anti-rotation

strap halfway up the headrest of the vehicle seat and

hook it onto the rear anchor (consult the user manual

from the manufacturer).

Step 3: as shown in gure 4, tighten the anti-rotation

strap until the adjuster turns green. Jiggle the safety seat

to check that the anti-rotation strap is tightened correct-

ly. If you want to release the anti-rotation strap, press the

button so the adjuster swivels at an angle.

c- Harness installation for group 0+I

Step 1: as shown in gure 1, press the central adjuster

while pulling the harness strap to release the shoulder

straps.

Step 2: as shown in gure 2, press the red button to un-

fasten the harness buckle.

Step 3: as shown in gure 3, pull both shoulder straps

towards the sides of the seat.

Step 4: as shown in gure 4, position the child in the seat

making sure that the lap belt holds the child’s pelvis se-

curely. Check the shoulder height, the shoulder straps

should go slightly above the child’s shoulders. If they are

too far above or below the child’s shoulders, this may

reduce the safety of the child safety seat.

Step 5: as shown in gure 5, pull the harness adjustment

strap outwards to hold the child securely, making sure

it is not too tight. Check that you can t your hand be-

tween the harness strap and the child’s chest. Make sure

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Be Cool Pivot in the language / languages: English, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Be Cool Pivot Manual

Product: