768106

Be Cool Pivot Manual

62
Zoom out
Zoom in
Previous page
1/144
Next page
EN
62
1
2
INTRODUCTION TO THE SAFETY SEAT
FUNCTIONS
Rotation function
1 Fitted in forward facing position
5 Fitted in rear facing position
As shown in gure 1, use your thumb to pull the rotation
control handle in order to turn the child seat round. It can
be turned both ways (see gure 1, 2, 3, 4 and 5). When
you have nished turning it, release the rotation control
handle and the “OK” sign will be displayed (see gure 5).
Important: On car journeys, the safety seat must
not be used in a sideways position and must not be
rotated. It must only be tted in either the forward
facing position (gure 1) or the rear facing position
(gure 5).
INSTALLATION FOR GROUP 0+1 (0-18 KG)
IN THE REAR FACING POSITION
Note:
1. The safety seat is only suitable for use in the listed ve-
hicles tted with ISOFIX anchor systems and approved
by ECE regulation No. 14.
2. Correct installation for group 0 + 1 is in the rear facing
position and is suitable for children from 0 to 18 kg.
3. This child safety seat for group 0 + 1 only has one seat-
ing position which is level 1.
4. The child safety seat for group 0 + 1 must not be tted
into seats equipped with an airbag.
5. Important: If the child weighs less than 9 kg, this child
safety seat must not be installed in the forward facing
position.
6. Important: On car journeys, the safety seat must not
be used in a sideways position.
7. The group 1 insert is suitable for use with children who
weigh between 9-12 kg. The group 0+ insert should be
tted with the group 1 insert and this is then suitable for
children who weigh less than 9 kg.
8. In the rear facing position, add the anti-collision
sponge; in the forward facing position, remove the an-
ti-collision sponge.
a- ISOFIX installation for group 0+1
Step 1: as shown in gure 1, turn the child safety seat to
the rear facing position (see the rotation function section
on page 8). Then, pull the seat position adjustment han-
dle to set it to level 1.
Step 2: as shown in gure 2, release the ISOFIX connec-
tor. Pull the ISOFIX adjustment handle and the ISOFIX
… 62 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Be Cool Pivot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Be Cool Pivot in the language / languages: English, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info