IIB. Specific adjustment functions
MOON PHASES
- FIG 2a
Adjusting the moon phase
Press the moon phase corrector button (C3) until the full moon appears in the center
of the aperture (I).
➢
Use a calendar to calculate the date of the last full moon.
Press on the moon phase corrector button (C3) as many times as the number of
elapsed days since the last full moon.
Proper functioning of the moon phase function requires that the date and day indi-
cated on your watch are correctly set:
Date setting
Using the tool supplied with your watch, press on the corrector button (C1) until the
desired date is indicated (E).
Changing the weekday
Using the tool supplied with your watch, press on the corrector
button (C2) until the desired weekday is indicated (K).
It is extremely important that you do not adjust your watch (with the exception of setting the
hour) between 8pm and 2am in the morning.
ALARM + DUAL TIME FUNCTION
- FIG 2b
Crown I:
setting time, date and 2nd time zone.
Position 1: To wind the movement manually: turn the crown clockwise (approx. 20
turns) if the watch has not been worn for a long time.
Position 2:
Date correction (E): turn the crown clockwise until the desired date is
displayed. Check that the date change takes place at midnight and not at
midday.
Setting the 2nd time zone (D): turn the crown counter-clockwise until the
2nd time zone time is indicated.
RAPID DATE CHANGE
1) Pull the crown out to position 2.
2) Turn the crown until the required date is indicated in (E).
3) Push the crown back into position 1 once the date is set.
If your watch comes equipped with a corrector for changing the date (FIG 3c, correc-
tor C1), use the small tool provided in the watch box to adjust the date.
For months with less than 31 days, change the date manually at the end of the
month.
DUAL TIME FUNCTION
With crown adjustment - FIG 1a
Pull the crown out to position 2. Turn the crown clockwise to move the 2nd time
zone hand backwards or forwards to the required position (D).
With corrector adjustment
- FIG 1h
Press the corrector push button (C1) successively to move the hand of the second
time zone forwards.
Attention: do not make any adjustments immediately after having set the time on your
watch in a counter-clockwise direction, as this may damage the movement.
In this specific situation, wait approximately 30 minutes before correcting the second
time zone.
POWER RESERVE
- FIG 1e, f, g, h
For watch models with power-reserve indicators, the hand indicates, on a scale which
may vary between models, the running time left before the watch stops. Once the me-
chanism is completely rewound, the indicator is at its maximum position and indicates
how long your watch will run without further winding.
1110
English
