WWW.MANUALS.WS
WWW.MANUALS.WS
19
o Place a suitably sized cup under the filter holder ring nut (5).
o Switch the appliance on using the ON/OFF switch (12), the
ON/OFF neon (24) will light.
o Follow either the manual or automatic reservoir filling process.
o Check that the water boiler neon (25) is not flashing, if it is then
the water boiler is not ready to dispense water.
o When the water boiler neon stays lit, press the water boiler
ON/OFF button (29) to start dispensing coffee.
o You can control how quickly the water dispenses by using the
water flow control knob (32).
o If this control knob is turned towards the minus symbol,
then the water will dispense more slowly and the coffee
will taste stronger.
o If this control knob is turned towards the plus symbol, then
the water will dispense more quickly and the coffee will
taste weaker.
o Press the water boiler ON/OFF button (29) again to stop the
water dispensing.
o Switch the appliance off using the ON/OFF switch (12).
o When the coffee machine has cooled sufficiently, take the filter
holder (16) out of the filter holder ring nut (5).
o Wipe over the filter holder with a damp cloth to keep it in
pristine condition.
o Remove the screw from the centre of the filter holder ring nut;
clean the water filter thoroughly so that there are no traces of
coffee left on it. Then refit the filter to the filter holder ring nut,
making sure that the screw is securely tightened.