Manual Batavia XXL SPEED SAW Mini BT-CS001 (page 22 of 64) (English, German, Dutch, French)

589451

Zoom out

Zoom in

1/64

i) Do not use damaged grinding discs. Before

each use, inspect the grinding wheels for

any chipping or cracks. If the electric power

tool or the grinding disc is dropped, inspect

it for damage or replace it with an

undamaged grinding disc. When you have

inspected and installed the grinding disc,

make sure that you, and any other nearby

individuals, remain out of the plane of the

rotating grinding disc and then allow the

tool to rotate at its highest speed for one

minute. Damaged grinding discs usually break

during this test time.

j) Wear protective clothing and equipment.

Depending on the application, use either a

full face visor, protective goggles or safety

glasses. As far as appropriate, where a dust

mask, hearing protection, safety gloves or

special apron to protect yourself from

splinters and other particles of material.

The eyes must be protected against any ying

particles which may be generated during the

various applications. Dust masks or respirators

must lter out the dust generated by the

application. If you are exposed to loud noise

for a long time, you may suffer from hearing

loss.

k) Make sure that other people remain at a

safe distance from your working area.

Anyone entering the work area must wear

personal safety clothing and equipment.

Fragments of the workpiece or of a broken tool

insert may y off and cause injuries, even

outside the direct working area.

l) If you are carrying out work in situations

where the tool insert may make contact with

concealed power lines or its own power

cable, only hold the device by the insulated

hand grips. Contact with a live cable could

result in metal parts of the device also

becoming live and lead to an electric shock.

m) Keep the power cable and the rotating tool

insert far apart. If you lose control of the

device, the power cable may be severed or

caught and may draw your hand or arm into the

rotating tool insert.

Never put down the electric power tool

before the tool insert has come to a complete

stop. The rotating tool insert may come into

contact with the supporting surface and cause

you to lose control of the electric power tool.

o) Do not leave the electric power tool running

while you carry it around. Your clothes may

become caught through accidental contact with

the rotating tool insert and result in the tool

drilling into your body.

p) Clean the ventilation slits on your electric

power tool, regularly. The motor fan draws

dust into the housing and a large accumulation

of metallic dust can cause electrical hazards.

q) Do not use the electric power tool in the

vicinity of ammable materials. Sparks can

ignite such materials.

r) Do not use any tool inserts which require

liquid coolants. The use of water or other

liquid coolants could result in electrical shock.

2.6 FURTHER SAFETY INSTRUCTIONS FOR

CUT OFF GRINDING APPLICATIONS

Kickback and relevant safety instructions

Kickback is the sudden reaction following snagging

or jamming of a rotating grinding disc. Snagging or

jamming lead to an abrupt stop of the rotating tool

insert. This may then cause the uncontrolled electric

power tool to accelerate in the opposite direction to

the inserted tools direction of rotation at the point

were it jammed. If, for example, a grinding disc

snags or jams inside a workpiece, the edge of the

grinding disc which is inside the workpiece may

become caught and thus cause the grinding disc to

jump out or create a kickback. The grinding disc then

moves towards or away from the operator,

depending on the direction of rotation of the disc at

the jamming point. This can also cause a grinding

disc to break. A kickback is the result of improper or

incorrect use of the electric Power tool. It can be

avoided by taking suitable precautions, as described

below.

a) Hold the electric power tool rmly and

place your body and arms in such a

position that you can absorb the force of a

kickback. Always use the auxiliary grips,

when available, in order to have the

greatest possible control over kickback

forces or torque reactions at high speed.

By taking suitable precautionary measures, the

operator can control kickback and reaction forces.

b) Never bring your hand into the vicinity of a

rotating tool insert. The inserted tool could

move over your hand if kickback occurs.

I have a Batavia BT-CS001 XXL speed saw . Brilliant saw but one of the windings on the motor has gone open circuit . Can you supply a new replacement motor ? Submitted on 25-4-2020 at 13:49
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia XXL SPEED SAW Mini BT-CS001 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Batavia XXL SPEED SAW Mini BT-CS001

Batavia XXL SPEED SAW Mini BT-CS001 Additional guide - English, German, Dutch, French - 1 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia XXL SPEED SAW Mini BT-CS001 Manual

Product: