Manual Batavia XXL SPEED SAW Mini BT-CS001 (page 20 of 64) (English, German, Dutch, French)

589451

Zoom out

Zoom in

1/64

2.2 SAFETY INSTRUCTIONS FOR ALL SAWS

a) DANGER: Do not put your hands in the

sawing area or on the saw blade. Use your

second hand to hold onto the auxiliary

handle or the motor housing. If both hands

are being used to hold the circular saw, then

they cannot be injured by the saw blade.

b) Do not grip underneath the workpiece. The

safety guard cannot protect you against the

saw blade under the workpiece.

c) Adjust the cutting depth to the thickness of

the workpieces. The saw should protrude by

no more than the height of one tooth under the

workpiece.

d) Never hold the workpiece to be sawn in

your hand or over your leg. Secure the

workpiece in a stable holder. It is important

to fasten the workpiece rmly in order to

minimise the danger of contact with the body,

jamming of the saw blade or loss of control.

e) Grip the electric power tool by the

insulated handling surfaces only when you

are carrying out work in situations where

the tool insert may make contact with

hidden power lines or its own power cable.

Contact with a live wire places a voltage on

the metal parts of the electric power tool and

will lead to an electric shock.

f) Always use a stop or a straight edge guide

when making longitudinal cuts. These

improve the accuracy of the cut and reduce

the possibility of the saw blade jamming.

g) Always use saw blades of the right size

and with matching locating holes (e.g.

star-shaped or round).

Saw blades which are

not matched to the mounting pieces of the saw

will run eccentrically and lead to loss of control.

h) Never attach the saw blade using damaged

or incorrect washers or screws. The saw

blade washers and screws are specially

constructed for your saw, to give optimal

performance and operating safety.

2.3 ADDITIONAL SAFETY INSTRUCTIONS

FOR ALL SAWS

The causes of kickback and how to avoid them:

• A kickback is a sudden reaction due to

snagging, jamming or misalignment of the saw

blade, which results in the uncontrolled saw

jumping out of the workpiece and moving

towards the operator.

• If the saw blade having snagged or jammed in

a self-closing saw cut, is locked and the

motors power jolts the device back towards

the operator.

• If the saw blade is rotated or misaligned in the

saw cut, the teeth on the rear edge of the

blade can become hooked in the surface of

the workpiece, whereby the saw blade jumps

out of the cut and the saw springs back in the

direction of the operator.

A kickback is the result of improper or incorrect

use of the saw. It can be avoided by taking

suitable precautions, as described below.

a) Hold the saw rmly with both hands and

place your arms in such a position that you

can absorb the force of a kickback. Always

keep yourself to one side of the saw blade

and never bring the blade in line with your

body. In the event of a kickback, the circular

saw may spring backwards; however, the

operator can control the kickback force if

suitable measures have been taken.

b) If the saw blade becomes jammed or if you

interrupt the work, switch the saw off and

keep it held gently in the material until the

saw blade has come to rest. Never attempt

to extract the saw from the workpiece or to

pull it backwards while the saw blade is

moving; otherwise a kickback may occur.

Find and remove the cause for the saw-blade's

jamming.

c) If you wish to restart a saw that is already

in the workpiece, centre the saw blade in

the cut and check that the teeth are not

snagged in the workpiece. If the saw blade

jams, it may run out of the workpiece or cause

a kickback when the saw is restarted.

d) Provide support for large sheets to reduce

the risk of a kickback through jamming of

the saw blade. Large sheets can bend under

their own weight. The sheets must be

supported on both sides, at the edges and

close to the saw cut.

e) Do not use blunt or damaged saw blades. If

saw blades with blunt or misaligned teeth are

used, the saw cut is too narrow resulting in

increased friction, jamming of the blade and

kickback.

I have a Batavia BT-CS001 XXL speed saw . Brilliant saw but one of the windings on the motor has gone open circuit . Can you supply a new replacement motor ? Submitted on 25-4-2020 at 13:49
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia XXL SPEED SAW Mini BT-CS001 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Batavia XXL SPEED SAW Mini BT-CS001

Batavia XXL SPEED SAW Mini BT-CS001 Additional guide - English, German, Dutch, French - 1 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia XXL SPEED SAW Mini BT-CS001 Manual

Product: