589480

Batavia CROC SAW BT-JCS001 Manual

32
Zoom out
Zoom in
Previous page
1/64
Next page
TM
GUIDE BAR
A bar with any of the following fault should be
replaced.
• Wear inside the bar rails which permits the
chain to lay over sideways.
• Bent guide bar.
• Cracked or broken rails
• Spread rails
Lubricate guide bars with a sprocket at their tip
weekly. Using a grease syringe, lubricate
weekly in the lubricating hole. Turn the guide
bar and check that the lubrication holes and
chain groove are free from impurities.
STORING THE PRODUCT
• Disconnect from power supply and store
out of the reach of children.
• Clean all foreign material from the product.
Store idle unit indoors in a dry, well-
ventilated area that is inaccessible to
children. Keep away from corrosive agents
such as garden chemicals and de-icing
salts.
TROUBLESHOOTING
PROBLEM
• Bar and chain running hot and smoking.
CAUSE
• Check chain tension for over tightened
condition.
• Oil reservoir empty.
REMEDY
• Tension chain. Refer to Chain Tension
earlier in this manual.
• Check oil reservoir.
PROBLEM
• Motor runs, but chain is not rotating
CAUSE
• Chain tension too tight.
• Check guide bar and chain assembly.
• Check guide bar and chain for damage.
REMEDY
• Retention chain. Refer to Chain Tension
earlier in this manual.
• Refer to Replacing the Bar and Chain
earlier in this manual.
• Inspect guide bar and chain for damage.
TECHNICAL DATA
• Chain Lubricant
Tank Capacity:
• Bar Length:
• Cutting capacity:
• Chain type:
• Input:
• Weight:
55 ml
203 mm
Ø10 cm
Low prole skip tooth
narrow kerf
600 w
3.8 kg
DISPOSAL
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage.
This packaging is a raw material and as
such can either be reused or can be fed
back into the raw material cycle. The electric
power tool and its accessories are made
from various materials such as metals and
plastics. Take defective components to a
special refuse collection point. Ask about
these at your specialist shop or local council.
32
Croc Saw Manual.indb 32 24-04-14 11:18
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia CROC SAW BT-JCS001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia CROC SAW BT-JCS001 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info