759585

Batavia BT-PS002 - 7061494 Manual

27
Zoom out
Zoom in
Previous page
1/64
Next page
27
EN
MARKED CUTTING
1. Turn the selector switch (18) to marked cut
function.
2. Press the switch lock (1) and push the
motor down. The casing stops in 2.5 mm
cutting depth position.
Note: The marking line should be aligned
with cutting line A (0 mark).
PLUNGE CUTS
1. For a straight cut rst loosen both rotary
knobs (8) and swivel the plunge saw to 0°
position on the scale. Tighten the rotary
knobs again.
2. Turn the selector switch (18 to plunge cut
function.
3. Set the desired plunge depth. Ensure that
the guide rail track compensation (10) is up
if not using the guide rail.
4. Press the switch lock (1) and the ON/OFF
switch (2) and push the motor down. Guide
the saw forward to cut.
Note: To prevent the saw from kicking back
during plunge cuts follow these steps:
• Always place the plunge saw with the rear
edge of the base plate (4) against a xed
limit stop.
• Hold the plunge saw in both hands and
slowly lower the saw blade.
• The cutting width marks (16) show the most
foremost and rearmost cutting points of the
saw blade (Ø 165 mm) at maximum cutting
depth and when using the guide rail.
CHANGE SAW BLADE
Before any maintenance work always switch
off the plunge saw and disconnect from mains
power.
1. Loosen both rotary knobs (8) and swivel the
plunge saw to 0° position before changing
the saw blade. Tighten the rotary knobs
again.
2. Set the selector switch (18) to the change
saw blade icon.
3. Press the switch lock (1) down and push
the motor down.
4. Press and hold the spindle arrester down.
5. Use a 5 mm Allen key to turn the screw at
the saw blade slightly clockwise or counter-
clockwise until the spindle clicks into place.
7061494-T-Raxx_1200W-Ma-1805-17.indd 27 17-05-18 10:30
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia BT-PS002 - 7061494 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-PS002 - 7061494 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info