759585

Batavia BT-PS002 - 7061494 Manual

26
Zoom out
Zoom in
Previous page
1/64
Next page
26
STRAIGHT CUTS (90° CUT)
1. Loosen both rotary knobs (8) and swivel the
saw to 0° position on the scale. Tighten the
rotary knobs again.
2. Turn the selector switch (18) to plunge cut
function.
3. Set the desired plunge depth. Ensure that
the guide rail track compensation (10) is up
when using the saw without guide rail.
4. To switch on the saw press the switch lock
(1) and the ON/OFF switch (2) and push
the motor down. Guide the saw forward to
cut.
MITER CUTS (UP TO 48°)
1. First loosen both rotary knobs (8) and
swivel the plunge saw to the desired
graduation. Tighten the rotary knobs again.
2. Switch the plunge saw on.
3. Turn the selector switch (18) to plunge cut
function.
4. Set the desired plunge depth. Ensure that
the guide rail track compensation (10) is in
up position when using the saw without
guide rail.
5. To switch the saw on press the switch lock
(1) and the ON/OFF switch (2) and push
the motor down. Guide the saw forward to
cut.
The cut indicator (15) shows the cutting path
for 90° and 45° miter cuts (without using the
guide rail).
cutting line when using the plunge saw
without guide rail for straight cuts.
2. For 45° miter cuts align position B (45 mark
on base plate) at the front of the base plate
with your marked cutting line.
PREPARATION
• Before each use check the proper function
of all installation xtures of the plunge saw
and only use the plunge saw if everything
works properly.
• Attach the work piece in such way that it
cannot move or bend during work. Line the
work piece respectively.
CORRECT WORKING WITH THE PLUNGE
SAW
• Always hold the plunge saw with both
hands at the hand grips (3) and (13).
• Always guide the plunge saw forward.
Never draw the plunge saw back!
• Place the plunge saw with the front part of
the base plate (4) on the work piece. Guide
the plunge saw only against the work piece
during operation.
• With the correct forward speed you prevent
overheating of the saw blade, and melting
when cutting plastics.
7061494-T-Raxx_1200W-Ma-1805-17.indd 26 17-05-18 10:30
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia BT-PS002 - 7061494 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-PS002 - 7061494 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info