759585

Batavia BT-PS002 - 7061494 Manual

25
Zoom out
Zoom in
Previous page
1/64
Next page
25
2. Tighten the cutting depth limit stop knob
(9). The motor or respectively the saw
blade can now be pushed down to the set
cutting depth.
For a clean, safe cut set the cutting depth in
such way that only max. one saw blade
tooth protrudes under the work piece.
SET CUTTING ANGLE
The plunge saw can be swivelled between 0°
and 48°:
1. Loosen both rotary knobs (8). Swivel the
motor to the desired cutting angle on the
cutting angle scale.
2. Tighten the rotary knobs (8) again.
DETERMINE CUTTING LINE
Two cutting lines are marked on the base plate
(4) of the plunge saw.
1. Align position A (0 mark on base plate) at
the front of the base plate with your marked
EN
Change Saw Blade
Plunge Cut
Marked Cut
Only use saw blades with a minimum speed of
5500 rpm.
SWITCH PLUNGE SAW ON/OFF
1. Press the switch lock (1) and then the ON/
OFF switch (2) to switch the plunge saw on.
2. Release the ON/OFF switch (2) to switch
the plunge saw off.
Notes: Pressing the switch lock (1) unlocks
the plunge cut mechanism at the same time,
so that the motor can be moved downwards.
The saw blade emerges from the protective
cover. When lifting the saw the motor slides
back into the initial position.
SET CUTTING DEPTH
The cutting depth can be set between 0 - 54
mm:
1. Loosen the cutting depth limit stop knob (9)
and slide it to the desired cutting depth
according to the graduated scale (11) to set
the cutting depth.
Note: The graduated values on the scale
(11) apply for straight cuts (90° cut).
The guide rail track compensation (10)
must be tilted up when using the plunge
saw without guide rail. Only when using
the plunge saw with guide rail the guide rail
track compensation is used to compensate
for the thickness of the guide rail.
Using the guide rail = guide rail track
compensation down.
Not using the guide rail = guide rail track
compensation lever up.
7061494-T-Raxx_1200W-Ma-1805-17.indd 25 17-05-18 10:30
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia BT-PS002 - 7061494 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-PS002 - 7061494 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info