758289

Batavia BT-JS002 - 7063410 Manual

10
Zoom out
Zoom in
Previous page
1/42
Next page
English
8
Do not set the mitre angle during
use.
• Slacken the Allen screws (III) using the
Allen key (II).
• Tilt the saw shoe (I) to the required
position.
• Tighten the Allen screws (III) using the
Allen key (II).
13. Using the pendulum action
switch
The pendulum action switch is used to set
the way in which the teeth of the saw blade
grip the material. The pendulum action
switch can be set to 4 positions.
Do not set the pendulum position during
use.
Turn the pendulum action switch (9) to
required position according to the material
to be worked. Refer to the table below to
select the required position.
Material Pendulum position
Wood . . . . . . . . . . 1 — 3
Plastics . . . . . . . . . . .
1
Aluminium . . . . . . . . 0 — 1
Steel . . . . . . . . . . . . 0
Ceramics . . . . . . . . . . 0
Rubber . . . . . . . . . . . 0
14. Dust removal
The saw is equipped with a changeover
switch for dust removal (7).
14.1 Set the switch to II to open the dust
outlet. The dust is thus blown away,
which improves the visibility of the cut-
ting line.
14.2 Set the switch to I to close the outlet.
When connecting a vacuum cleaner
(see next chapter), set the switch to the
I position.
15. Dust collection
This jig saw is a powerful tool that can pro-
duce a lot of sawdust. By connecting the jig
saw to a vacuum cleaner, a clean dust-free
operation is possible.
Do not use dust extraction when cutting
metal.
Dust extraction is not possible for mitre
cuts.
15.1 Slide the dust nozzle (6) all the way into
the opening until the snap-in nose visi-
bly and audibly locks into place.
15.2 Connect the dust nozzle (6) with a vac-
uum cleaner or dust extractor.
When sawing wood, it is best to use an
additional dust protection mask since
wood dust is a health hazard.
16. The parallel stop
To cut parallel to a wood edge, you can use
the enclosed parallel stop (15).
16.1 In order to x the parallel stop (15),
loosen the fastening screws (11)
slightly. Using the centimetre scale on
the parallel stop (15), you can adjust the
distance between the stop bar and the
saw blade.
7062849-Jig_Saw_800W-Ma-1803-09.indb 8 22-03-18 11:07
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia BT-JS002 - 7063410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-JS002 - 7063410 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info