Manual Batavia BT-JS002 - 7063410 (page 9 of 42) (English, German, Dutch, French)

758289

Zoom out

Zoom in

1/42

English

6. Contents of packing

1× Pendulum Stroke Jig Saw

2× Saw blade

1× Parallel stop

1× Vacuum hose adapter

1× Allen key

1× Instruction manual

7. Intended use

The jig saw is intended for split cuts and

cutouts in wood, plastic and rubber. The jig

saw can be used for straight and curved

cuts at 0° to 45°.

8. Inserting the saw blade

Always disconnect the main power plug

prior to performing any work on the

machine.

Use only T-shank jig saw blades.

8.1 Lift the transparent blade cover (12) up

and hold it.

8.2 Pull the lever of the blade clamp and

slide the saw blade into the groove as

far as it will go with the blade teeth

pointing forward. Make sure that the lug

of the blade tted into the blade clamp,

then release blade clamp lever (17),

check the blade held rmly.

8.3 Place the transparent blade cover to

initial position.

Attention: After a cut, the saw blade will be

very hot because of the friction. Be careful

when removing the saw blade. Protect your-

self by wearing appropriate protective

gloves.

9. Power on/off

9.1 Insert the mains plug into the socket.

The LED indicator light (14) lights up

and indicates that power is applied.

9.2 To turn on the pendulum stroke jig saw,

press the ON/OFF switch (3). The

switch can be set to continuous mode

by pressing the power on lock (2).

9.3 Pressing the ON/OFF switch (3) again

returns the power on lock (2) to the

starting position.

9.4 To turn off the pendulum stroke jig saw,

release the ON/OFF switch.

10. Startup

Take note of the line voltage. The voltage of

the power source must match the informa-

tion on the type label on the machine.

220 V~ – 240 V~ can also be operated with

230 V~ units.

• Before switching on of the jig saw, the

front of the base plate (8) must lie flat

on the workpiece. Make sure that the

base plate rests securely on the entire

surface.

• Always hold the jig saw rmly with both

hands. Make sure that the saw blade is

not in contact with the workpiece before

the jig saw is turned on.

• Make sure that the saw blade has com-

pletely stopped before removing the jig

saw from the workpiece.

11. Stroke rate selection

You can adjust the stroke rate with the

stroke rate controller (1). The required

stroke rate of the saw blade is dependent on

the material and the saw blade used, and

should be determined by practical tests.

Material Stroke adjustment

Wood . . . . . . . . . . 5 — 6

Soft steel . . . . . . . .

—

Stainless steel. . . . . . . 3 — 4

Aluminium . . . . . . . . 3 — 6

Plastic . . . . . . . . . 1 — 4

Attention: Do not let the jig saw run in con-

tinuous operation with the lowest speed. As

a result, the motor can overheat.

12. The diagonal cut

The mitre angle is variable between 0° and

45°.

7062849-Jig_Saw_800W-Ma-1803-09.indb 7 22-03-18 11:07

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-JS002 - 7063410 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-JS002 - 7063410 Manual

Product: