Manual Batavia BT-CT001 - 7063419 (page 10 of 46) (English, German, Dutch, French)

758282

Zoom out

Zoom in

1/46

English

corners. This may cause kickback or

loss of control.

e. Do not attach a saw chain woodcarv-

ing blade or toothed saw blade. Such

blades create frequent kickback and

loss of control.

5. Safety warnings specic for

grinding and abrasive cutting-off

operations

a. Use only discs intended for your elec-

tric tool. Discs not intended for the

electric tool cannot be covered in a

suitable way and are unsafe.

b. Use discs only for the purpose they

are intended for by the manufacturer.

Never use the side of a cutting disc for

grinding. Cutting discs are intended for

cutting only. Lateral forces may cause

fracture.

c. Do not use worn-down discs from

larger electric tools. These are not

intended for the fast speeds of smaller

electric tools and may fracture.

d. Avoid blocking the disc and do not use

excessive pressure. Do not attempt

excessively deep cuts. Excessive loads

on the cutting disc increase the stress

and make it more prone to jamming or

blocking and increase the risk of kick-

back of fracture.

e. Do not position your body in line with

and behind the rotating wheel. When

the wheel, at the point of operation, is

moving away from your body, the possi-

ble kickback may propel the spinning

wheel and the power tool directly at

you.

f. When wheel is binding or when inter-

rupting a cut for any reason, switch off

the power tool and hold the power tool

motionless until the wheel comes to a

complete stop. Never attempt to

remove the cut-off wheel from the cut

while the wheel is in motion otherwise

kickback may occur. Investigate and

take corrective action to eliminate the

cause of wheel binding.

g. Do not restart the cutting operation in

the workpiece. Let the wheel reach full

speed and carefully re-enter the cut.

The wheel may bind, walk up or kick-

back if the power tool is restarted in the

workpiece.

h. Support panels or any oversized work-

piece to minimize the risk of wheel

pinching and kickback. Large work-

pieces tend to sag under their own

weight. Supports must be placed under

the workpiece near the line of cut and

near the edge of the workpiece on both

sides of the wheel.

i. Use extra caution when making a

“pocket cut” into existing walls or

other blind areas. The protruding wheel

may cut gas or water pipes, electrical

wiring or objects that can cause

kickback.

6. Safety warnings specic for wire

brushing operations

a. Be aware that wire bristles are thrown

by the brush even during ordinary

operation. Do not overstress the wires

by applying excessive load to the

brush. The wire bristles can easily pen-

etrate light clothing and/or skin.

b. Allow brushes to run at operating

speed for at least one minute before

using them. During this time no one is

to stand in front or in line with the

brush. Loose bristles or wires will be

discharged during the run-in time.

c. Direct the discharge of the spinning

wire brush away from you. Small parti-

cles and tiny wire fragments may be

discharged at high velocity during the

use of these brushes and may become

imbedded in your skin.

d. Do not exceed 15,000 RPM when

using wire brushes.

7. Residual risks

Even when you use this electric power tool

correctly, residual risks remain. The follow-

ing dangers may arise in connection with

the construction and application of electric

power tools, among other things:

• Lung damage if no suitable protective

dust mask is used.

7062854-Compact-Tool-170W-Ma-1803-27.indb 8 14-05-18 10:20

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CT001 - 7063419 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-CT001 - 7063419 Manual

Product: