Manual Batavia BT-CSN001 - 7063094 (page 7 of 32) (English, German, Dutch, French)

758256

Zoom out

Zoom in

1/32

English

ation of the nails. In such cases, always

make sure that there is no one (and

nobody’s hands or feet; etc.) behind the

thin board or next to the wood you are

going to nail.

2.20 Simultaneous nailing on both sides of

the same wall is dangerous. Under no

circumstances should nailing be per-

formed on both sides of a wall at the

same time. This would be very danger-

ous since the nails might pass through

the wall and thus cause injuries.

2.21 Do not use the power tool on scaffold-

ings, ladders. The power tool shall not

be used for specic application for

example:

– when changing one driving location to

another involves the use of scaffold-

ings, stairs, ladders or ladder alike con-

structions, e.g. roof laths,

– closing boxes or crates,

– tting transportation safety systems

e.g. on vehicles and wagons.

2.22 Remove all remaining fasteners and

battery from nailer when:

– doing maintenance and inspection;

– checking proper operation of push lever

and trigger;

– attaching or removing the nose cap;

– clearing a jam;

– it is not in use;

– leaving work area;

– moving it to another location; and

– handing it to another person.

– Never attempt to clear a jam or repair

the Nailer unless you have removed

battery and all remaining fasteners

from the Nailer. The Nailer should never

be left unattended since people who are

not familiar with the Nailer might handle

it and injure the themselves.

2.23 Remove battery from nailer when:

a. loading nails;

b. turning the adjuster.

2.24 The operating environment for this

device is between 0°C and 40°C so

ensure use within this temperature

range. The device may fail to operate

below 0°C or above 40°C.

2.25 Do not allow foreign matter to enter the

hole for connecting the rechargeable

battery.

2.26 NEVER allow magnets (or similar mag-

netic devices) to be adjacent to the

nailer, because the nailer has a mag-

netic sensor inside. Doing so will cause

a failure or risk of injury by malfunction.

2.27 Resting the unit after continuous work.

2.28 The power tool is equipped with a tem-

perature protection circuit to protect the

motor. Continuous work may cause the

temperature of the unit to rise, activat-

ing the temperature protection circuit

and automatically stopping operation. If

this happens, allow the power tool to

cool before resuming use.

2.29 This product may cease to operate

when an abnormality is detected.

2.30 Do not give a strong shock to the switch

panel or break it. It may lead to a

trouble.

3. Before the rst use

Remove the machine and all accessories

from the package. Keep the packaging

materials out of the reach of small children.

There is a danger of suffocation!

4. Contents of packing

1× Cordless stapler / nailer

1× Instruction manual

5. Intended use

This tool was designed for driving nails into

wood and similar materials. Use it for its

intended purpose only.

Metal and materials containing asbestos

must not be worked with this tool.

6. Nail / staples selection

(See )

• Nails: max. length 50 mm.

• Staples: max. length 40 mm.

7. Loading nails / staples

Only use recommended nails / staples.

Non-recommended nails / staples are more

likely to jam in the nil gun.

7.1 Release the battery  from the nail

gun.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CSN001 - 7063094 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-CSN001 - 7063094 Manual

Product: