Manual Batavia BT-CSN001 - 7063094 (page 6 of 32) (English, German, Dutch, French)

758256

Zoom out

Zoom in

1/32

English

either eye protection or a wide vision

mask over prescription glasses.

Employers should always enforce the

use of eye protection equipment.

2.9 Protect your ears and head. When

engaged in nailing work please wear ear

mufers and head protection. Also,

depending on condition, ensure that

surrounding people also wear ear muf-

ers and head protection.

2.10 Pay attention to those working close to

you. It would be very dangerous if nails

that were not properly driven in should

hit other people. Therefore, always pay

attention to the safety of the people

around you when using this tool. Always

make sure that nobody’s body, hands or

feet are close to the nail outlet.

2.11 Never point the nail outlet towards peo-

ple. Always assume the tool contains

fasteners. If the nail outlet is pointed

towards people, serious accidents may

be caused if you mistakenly discharge

the tool. When connecting and discon-

necting the battery, during nail loading

or similar operations, be sure the nail

outlet is not pointed towards anyone

(including yourself). Even when no nails

are loaded at all, it is dangerous to dis-

charge the tool while pointing it at

someone, so never attempt to do so. No

horseplay. Respect the tool as a work-

ing implement.

2.12 Check push lever before use. Make sure

the push lever operates properly. (The

push lever may be called “Safety”.)

Never use the Nailer unless the push

lever is operating properly, otherwise

the Nailer could drive a fastener unex-

pectedly. Do not tamper with or remove

the push lever, otherwise the push lever

becomes inoperable.

2.13 Be careful when connecting the battery.

When connecting the battery and load-

ing nails in order not to re the tool by

mistake, make sure of the followings.

• Do not touch the trigger.

• Do not allow the ring head to contact

with any surface.

• Keep the ring head down. Strictly

observe the above instructions, and

always make sure that no part of the

body, hands or legs is ever in front of

the nail outlet.

2.14 Do not carelessly place your nger on

the trigger. Do not place your nger on

the trigger except when actually nailing.

If you carry this tool or hand it to some-

one while having your nger on the

trigger, you may inadvertently discharge

a nail and thus cause an accident.

2.15 Press the nail outlet rmly against the

material to be nailed. When driving in

nails, press the nail outlet rmly against

the material to be nailed. If the outlet is

not applied properly, the nails may

rebound.

2.16 Keep hands and feet away from the

ring head when using. It is very dan-

gerous for a nail to hit the hands or feet

by mistake.

2.17 Beware of the tool’s kickback. Do not

approach the top of the tool with your

head etc. during operation. This is dan-

gerous because the tool may recoil

violently if the nail currently being driven

in comes into contact with a previous

nail or a knot in the wood.

2.18 Be careful of double re due to recoil. If

the push lever is unintentionally allowed

to re-contact the workpiece following

recoil, an unwanted fastener will be

driven. In order to avoid this undesirable

double re,

a. Intermittent operation (Trigger ring)

• Set the switching device to FULL

SEQUENTIAL ACTUATION

MECHANISM.

• Pull the trigger rapidly and rmly.

b. Continuous operation (Push lever ring)

• Do not press the nailer against the

wood with excessive force.

• Separate the nailer from the wood as it

recoils after fastening.

2.19 Take care when nailing thin boards or

the corners of wood. When nailing thin

boards, the nails may pass right

through, as may also be the case when

nailing the corners of wood due to devi-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CSN001 - 7063094 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-CSN001 - 7063094 Manual

Product: