Manual Batavia BT-CS009 - 7062244 (page 29 of 66) (English, German, Dutch, French)

759583

Zoom out

Zoom in

1/66

English

4. Clean the ange and install a new tool

insert. Pay attention to the direction of

motion (check the arrows on the housing

and on the tool insert).

5. Tighten the clamping screws, anticlock-

wise, to secure the tool insert, ensuring

that the tool insert is concentric.

6. Before you operate the on/off switch,

make sure that the tool insert is correctly

installed, that the moving parts are free

and the clamping screws are rmly

tightened.

Attention! The Allen key (16) must not be

left inserted in the clamping screw.

Note: After installing or changing a tool insert,

allow the electric power tool to run for the rst

minute without any load, in order to make sure

that the tool insert is correctly seated.

Extraction of dust and splinters

(Figure 5)

Attention! When working with items coated in

leadcontaining paint, for example, or with

some types of wood, harmful or poisonous

dust particles may be generated. This presents

a danger both for the user and for other people

nearby. Protect yourself with suitable personal

safety clothing and equipment and keep other

people away from the working area. Connect

an extraction system or a vacuum cleaner to

the electric power tool. This will provide you

with optimum extraction of dust and splinters

from the workpiece.

Advantages: You preserve both the electric

power tool and your health. Moreover, you’re

working area remains clean and safe.

1. Connect the suction hose (13) to the dust

extraction connection (10).

2. Make sure that the seal inside the smaller

of the connecting pieces on the hose (13)

ts on to the dust extraction connection

(10).

3. Turn the suction hose to the right until it

engages.

4. Attach a suitable dust extraction device.

5. Before each use, ensure that the lid (13a)

is attached to the adapter (13b).

Notes:

• Make sure that the vacuum cleaner is

suitable for use with the electric power

tool. Most dry vacuum cleaners for

domestic use are well suited to this

purpose.

• The vacuum cleaner is particularly useful if

many cuts are being performed succes-

sively. It means that less frequent stops

are required to clean the electric power

tool and the workplace.

• When you are cutting materials which may

produce dangerous dust, always use a

vacuum cleaner. This applies, in particular,

to hardwoods, MDF sheets and ceramics.

Setting the cutting depth (Figure 6)

1. Loosen the adjustment screw (2).

2. Adjust the cutting depth according to the

scale (a) and tighten the adjustment screw

(2).

3. For wood and plastics, the cutting depth

should be selected to be a little deeper

than the material thickness.

4. A wood underlay can be used to achieve a

better cutting quality. The wood underlay

will, however, be damaged.

Connection to the power supply

Make absolutely sure, before connecting, that

the data on the nameplate agrees with the

mains power supply data. Always pull out the

power plug before making adjustments to the

electric power tool.

Note

ATTENTION!

• Before undertaking any work on the elec-

tric power tool, unplug it from the mains!

• Do not use tool inserts which are defective

or which exhibit tears or ssures.

• Do not use a ange or ange nut with a

hole larger or smaller than the hole in the

tool insert.

• Only use tool inserts of the same type as

those delivered with the electric power

tool. Seek advice from a specialist trader.

OPERATION

General instructions

• Select a suitable tool insert for the material

that is to be worked on.

• Check the condition and sharpness of the

tool insert.

7062244_MaxxSaw_Ma_#1612-19.indb 27 19-12-16 10:31

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CS009 - 7062244 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-CS009 - 7062244 Manual

Product: