796767
12
Zoom out
Zoom in
Previous page
1/21
Next page
- 31 -
Do not place the deep freezer in areas with high humidity, as this may damage
the device and reduce its cooling output.
Do not cover or clog the ventilation openings at the top of the device.
Ensure free air circulation.
Fig. 2
Maintain a minimum of 10 cm between
the top of the device and objects located
above it (e.g. cupboards). Failure to do
so may result in increased energy use or
overheating of the compressor (fig. 2).
If the device is located in the corner of a
room, maintain a minimum of 6 cm at
the sides in order to open the door wide
enough to enable access to drawers
(fig. 3).
Fig. 3
Place the device on a flat, level surface; it may not lean against a wall.
In order for the door to close automatically, adjust the device’s legs to make it tilt back
slightly. To do this, gently lift the device at its front until the legs are above the floor.
Connecting the device
DANGER! Electrical hazard!
Improper connection of the device to a power source may lead to injury from
electric shock!
Before installing, compare the local network’s parameters with the rating plate on
the device.
Only connect the device to a power source when it is compliant with all
parameters. Follow all safety rules!
Attention! If the device is tilted further than 30°, wait a minimum of 4 hours before
connecting it to a power source. Failure to wait may lead to damage to the compressor.
The socket and circuit must be secured to a minimum of 16A. Only connect the
device to a wall socket, do not use power strips or splitters.
Locate the device so that the plug is easily accessible in case it is necessary to
quickly disconnect the device from its power source.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bartscher 200LN - 700341 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bartscher 200LN - 700341 in the language / languages: English as an attachment in your email.

The manual is 0.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bartscher 200LN - 700341

Bartscher 200LN - 700341 User Manual - German - 21 pages

Bartscher 200LN - 700341 User Manual - Dutch - 21 pages

Bartscher 200LN - 700341 User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info